Z splice jig

[DGL]

were can I find how to make a Z splice jig?

[wingnut]

If your not doing a bunch of splices, it's just as easy to do them free hand. We do 20 or so a week and do them all free hand.

Here is a link to a build along we did a couple years back.

 http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=40;t=000078;p=6

Mike

[DGL]

Thanks Mike

[Eric Krewson]

I use this method but make a Z splice instead of a fishtail.

 http://selfbowyers.homestead.com/index.html

[Buemaker]

This is one I made a few years ago.

 

 

 

 

 

 

 

 

[Tom Leemans]

I have a jig, but you either need an adjustable jig, or slats that are always the same width. I do all mine freehand like Mike and Jason do. Take it slow and it'll come out fine.

p.s. Urac will take care of any tiny gaps.

[Buemaker]

I guess the pics speak for them self. When you use this jig always push it to the same side when sawing.  Bue--.

[DGL]

Thank you all. I`ll get er done now.

[dino]

Is there any advantage to a Z over a fish tail splice?  Looks like a fish tail might give more bonding surface, but a Z looks much easier to put together. dino

[Eric Krewson]

I have spliced at least 60 billets with a Z splice, never had a failure.

[dino]

Eric,
I don't doubt the strenght of the Z, but why would one use the Z over the fish tail splice? Whats the advantages or disadvantages???  dino

[mmgrode]

Z is easier/simpler than the fishtail to finesse to get a tight joint. Plenty strong with URAC for these applications.