INFO: Trad Archery for Bowhunters



« previous next »
Pages: [1]   Go Down

Author Topic: Poor Man's Damascus  (Read 2214 times)

Offline tippit

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6241
Poor Man's Damascus
« on: February 03, 2008, 09:03:00 AM »
I love the pattern of the different damascus but until I get a press or power hammer it is beyond my making.  However some nice patterns can come right from the forge...1080 steel capers.  Doc

 
Logged
TGMM Family of the Bow
VP of Consumption MK,LLC

Offline d. ward

  • Trad Bowhunter
  • **
  • Posts: 5791
Re: Poor Man's Damascus
« Reply #1 on: February 03, 2008, 09:10:00 AM »
Middle one,looks real good.bowdoc
Logged

Offline robslifts

  • Trad Bowhunter
  • **
  • Posts: 1083
Re: Poor Man's Damascus
« Reply #2 on: February 03, 2008, 09:41:00 AM »
they all look good to me!!!
Logged
St. Joe River Bows

Offline MYSTIKBOW

  • Trad Bowhunter
  • **
  • Posts: 1147
Re: Poor Man's Damascus
« Reply #3 on: February 03, 2008, 09:41:00 AM »
Hey Doc,
I think the pattern on all of those look pretty cool. Is a pattern like that prone to rust easier?  Do you use a gun blue for a finish or just lightly polish them?
Logged
I reckon so

Offline sticshooter

  • Trad Bowhunter
  • **
  • Posts: 4210
Re: Poor Man's Damascus
« Reply #4 on: February 03, 2008, 10:07:00 AM »
AMAZED AGAIN!<><
Logged
The Church of God is an anvil that has worn out many hammers.

"Walk softly..and carry a sharp   Stic."
TGMM

Online swp

  • Trad Bowhunter
  • **
  • Posts: 2120
Re: Poor Man's Damascus
« Reply #5 on: February 03, 2008, 11:36:00 AM »
Very NICE! If the top one is up for adoption, I know of someone that will give it a good home and bloody the blade every once in a while. :)
Logged
"People say you can't go back, its like when you get to the edge of a cliff and you take one more step forward or you do a 180 degree turn and take one more step forward. Which way are you going? Which one is progress?" Doug Tompkins

Offline robtattoo

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3588
Re: Poor Man's Damascus
« Reply #6 on: February 03, 2008, 12:17:00 PM »
Nice blades Jeff! I like playing with different etchants myself, to acheive interesting results......

 

 
Logged
"I came into this world, kicking, screaming & covered in someone else's blood. I have no problem going out the same way"

PBS & TBT Member

>>---TGMM, Family of the Bow--->

Offline tippit

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6241
Re: Poor Man's Damascus
« Reply #7 on: February 03, 2008, 12:35:00 PM »
Rob, We got a lot to discuss at the Sweat  :D
Logged
TGMM Family of the Bow
VP of Consumption MK,LLC

Offline OconeeDan

  • Trad Bowhunter
  • **
  • Posts: 1685
Re: Poor Man's Damascus
« Reply #8 on: February 03, 2008, 08:48:00 PM »
All of those look great!  What etchants are you using?
Dan
Logged

Offline 4runr

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6799
Re: Poor Man's Damascus
« Reply #9 on: February 04, 2008, 08:08:00 PM »
What I wouldn't give to just be a little trickle at that Sweat!! Just to get an earfull and an eyefull. Doc you and Rob need to record those conversations  :bigsmyl:    :bigsmyl:
Logged
Kenny

Christ died to save me, this I read
and in my heart I find a need
of Him to be my Savior
          By Aaron Shuste

TGMM Family of the Bow

Offline tippit

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6241
Re: Poor Man's Damascus
« Reply #10 on: February 04, 2008, 08:34:00 PM »
The pattern is quite simple and no etching.  I take my blade down to a finish polish, then keep normalizing it til I like the outer crust.  When you quench it all that blows off and leaves the pattern.  If you don't like it just keep finishing the blade to a more polished look. It just has a look of a real old blade.  Only problem is cause the blade is near or at finish ie. thin, you can warp it in the quench.  Just takes doing a few to find that point...Doc
Logged
TGMM Family of the Bow
VP of Consumption MK,LLC

Offline OconeeDan

  • Trad Bowhunter
  • **
  • Posts: 1685
Re: Poor Man's Damascus
« Reply #11 on: February 04, 2008, 10:47:00 PM »
Thanks, Doc.
Dan
Logged

Offline vermonster13

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 14572
Re: Poor Man's Damascus
« Reply #12 on: February 04, 2008, 10:54:00 PM »
Very cool
Logged
TGMM Family of the Bow
For hunting to have a future, we must invest ourselves in future hunters.

Offline ber643

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 9205
Re: Poor Man's Damascus
« Reply #13 on: February 05, 2008, 08:18:00 AM »
They sure look neat, Doc and Rob. Don't think I'll get to forging. So many fun things to do - so little time -   :D
Logged
Bernie: "Hunters Are People Too"

Ret'd USMC '53-'72

Traditional Bow Shooters of West Virginia (Previously the Official Dinosaur Wrangler, Supporter, and Lifetime Honorary Member)
TGMM Family of the Bow

Offline ZaneD

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 391
Re: Poor Man's Damascus
« Reply #14 on: February 05, 2008, 03:20:00 PM »
What does "normalizing" mean?
Logged

Offline LAR43

  • Trad Bowhunter
  • **
  • Posts: 620
Re: Poor Man's Damascus
« Reply #15 on: February 05, 2008, 04:16:00 PM »
As the steel grain structure is broken down & beaten out of alignment during forging & grinding many makers normalize their blades prior to continuing work on them.
Normalizing is heating of the steel to a dull red & allowing it to air cool. Many makers do this several times before the hardening/ tempering process to allow the grain structure in the steel to re align itself. Many also align the blade with magnetic north for/during the cooling process.
It's said to help pull the grain structure into alignment.

Larry
Logged
Age brings us the priceless gift of experience and knowledge. . . Priceless, but not free.

Offline tippit

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6241
Re: Poor Man's Damascus
« Reply #16 on: February 05, 2008, 09:09:00 PM »
Lar,  No wonder my knife seem to stick in my sheath...it must have been pointin' South  :)   Thanks for the response on normalizing...Doc
Logged
TGMM Family of the Bow
VP of Consumption MK,LLC
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©