INFO: Trad Archery for Bowhunters



« previous next »
Pages: [1]   Go Down

Author Topic: kbaknife put to use at TX Sweat  (Read 1985 times)

Offline tippit

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6241
kbaknife put to use at TX Sweat
« on: March 07, 2008, 11:25:00 PM »
Dave "hunt it" Stinson showed off one of Karl's T/D Bowie knives at the TX Sweat then proceeded to put to use on a couple of hogs.  Maybe we could get Dave to post some pictures of that amazing knife...Doc
Logged
TGMM Family of the Bow
VP of Consumption MK,LLC

Offline tomh

  • Trad Bowhunter
  • **
  • Posts: 449
Re: kbaknife put to use at TX Sweat
« Reply #1 on: March 08, 2008, 12:48:00 AM »
Karl makes some very nice blades, can't wait to see it!
Logged

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Re: kbaknife put to use at TX Sweat
« Reply #2 on: March 08, 2008, 07:56:00 AM »
Karl makes a lot of his knives in a "take down" configuration. You can clean it like a rifle. That is a very attractive feature to me.

Shore would like to see some pictures.
             
                                        Lin
Logged
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28

Offline kbaknife

  • Trad Bowhunter
  • **
  • Posts: 2670
Re: kbaknife put to use at TX Sweat
« Reply #3 on: March 08, 2008, 07:59:00 AM »
I certainly hope David DOES make a post on this topic!
He stopped by my place here in Illinois on the way down. The knife was sent to Kenny Rowe in Arkansas for a custom sheath that I haven't seen yet! He said he got it bloody and it performed well.
I couldn't be more pleased.
It was W2 steel, clay heat treated to creat a hamon, stinless steel fittings with an African Blackwood Handle. Built in a Take-down assembly.
That knife also won "Best Forged Blade" at the Ohio Classic Knife Show this last Fall.
(Jeezee Peats! Am I blowin' my own horn here?!!?)
Sorry.
I'm glad it got put to use and I got to meet David.
 
Logged
When the last deer disappears into the morning mist,
When the last elk vanishes from the hills,
When the last buffalo falls on the plains,
I will hunt mice for I am a hunter and I must have my freedom.
Chief Joseph

Offline OconeeDan

  • Trad Bowhunter
  • **
  • Posts: 1685
Re: kbaknife put to use at TX Sweat
« Reply #4 on: March 08, 2008, 08:32:00 AM »
WOW, that is a great looking knife!
Logged

Offline tippit

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6241
Re: kbaknife put to use at TX Sweat
« Reply #5 on: March 08, 2008, 08:35:00 AM »
Karl,  That was the slickest knife I've ever seen!  One screw and every part is lying on the table.  Karl even makes the screw driver to disassemble it!  

I'll email Dave and make sure he gets over here.  If you read the TX Sweat posts, Dave talks about the night hunt with dogs and chasing around the mesquite desert on 4 wheelers    :scared:
Logged
TGMM Family of the Bow
VP of Consumption MK,LLC

Offline tippit

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6241
Re: kbaknife put to use at TX Sweat
« Reply #6 on: March 08, 2008, 08:36:00 AM »
Karl,  Do you have a picture of it in the disassembled mode?
Logged
TGMM Family of the Bow
VP of Consumption MK,LLC

Offline Leftieshot

  • Trad Bowhunter
  • **
  • Posts: 306
Re: kbaknife put to use at TX Sweat
« Reply #7 on: March 08, 2008, 09:07:00 AM »
Yeah, I'd to see how its disassembled.  What are the dimensions of the knife?
It looks great!
Logged

Offline kbaknife

  • Trad Bowhunter
  • **
  • Posts: 2670
Re: kbaknife put to use at TX Sweat
« Reply #8 on: March 08, 2008, 09:45:00 AM »
I think that's about an 8-9 inch blade. We need to have David measure it!
I don't have any pics of that one disassembled. Here's one of a Bowie that is long gone now:
 

And, please believe me, I don't want to get in any trouble here but if you'd like to see something I just completed, I did a "build-a-long" on my site that wold just take too much space here. It shows some of the step-by-step procedures that I go through to make one of these:
 

When I got done, it looked like this:
 

Make sure to see this as well and click on the photos for enlargements:

No links to your commercial site, please.
Logged
When the last deer disappears into the morning mist,
When the last elk vanishes from the hills,
When the last buffalo falls on the plains,
I will hunt mice for I am a hunter and I must have my freedom.
Chief Joseph

Offline Leftieshot

  • Trad Bowhunter
  • **
  • Posts: 306
Re: kbaknife put to use at TX Sweat
« Reply #9 on: March 08, 2008, 10:09:00 AM »
WOW, thats awesome!  Don't really know what to say!
Logged

Offline tomh

  • Trad Bowhunter
  • **
  • Posts: 449
Re: kbaknife put to use at TX Sweat
« Reply #10 on: March 08, 2008, 10:20:00 AM »
Karl you have some of the most unique and good looking handle shapes and designs I have seen. Nice!
Logged

Offline brettlandon

  • Trad Bowhunter
  • **
  • Posts: 442
Re: kbaknife put to use at TX Sweat
« Reply #11 on: March 08, 2008, 07:10:00 PM »
:notworthy:    :notworthy:    :notworthy:  

-Brett

P.S.  I've just run out of words.  I'll check back when I've learned a new language.
Logged
Excellence is achieved, not purchased.

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Re: kbaknife put to use at TX Sweat
« Reply #12 on: March 09, 2008, 07:07:00 AM »
See? What did I tell ya?  :clapper:  


(I been waitin to use some o them smilie thingies.)
                                Lin
Logged
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28

Offline skullworks

  • Trad Bowhunter
  • **
  • Posts: 2012
Re: kbaknife put to use at TX Sweat
« Reply #13 on: March 10, 2008, 07:25:00 AM »
Incredible is all I an say! Super clean, sweet knife!
Logged
'cuz deer huntin' ain't catch & release!

Offline JC

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 4462
Re: kbaknife put to use at TX Sweat
« Reply #14 on: March 12, 2008, 10:58:00 AM »
Wow, incredible piece of steel. Love the hamon on Dave's...classy, subdued elegance.
Logged
"Being there was good enough..." Charlie Lamb reflecting on a hunt
TGMM Brotherhood of the Bow

Offline hunt it

  • Trad Bowhunter
  • **
  • Posts: 2622
Re: kbaknife put to use at TX Sweat
« Reply #15 on: March 18, 2008, 07:52:00 AM »
Sorry Guys,

Been away for March Break and missed this one. Thanks for posting pics Karl. It was a great pleasure to meet you and get the tour of your shop and see some of your other works of art! The knife performed as expected! Just the ticket for the job. Kenny sheath looks awesome but does not work on a belt no matter which way you wear it. I have not had time to call him but I intend to take some pics and send them to him. It seems that even though he had the knife the sheath is backwards from any direction. If you wear it where expected the knife handle is upside down. Karl your sheath is excellent and performed as well as the knife. How is my sambar knife coming along?
Logged
hunt it

Offline kbaknife

  • Trad Bowhunter
  • **
  • Posts: 2670
Re: kbaknife put to use at TX Sweat
« Reply #16 on: March 18, 2008, 09:15:00 AM »
I'm so tied up in the Blade Show inventory right now I haven't had time to focus on your new one. That piece of Sambar is so spectacular, it really deserves a special knife designed specifically for it.
I'll never be able to replace that piece.
You'll have something this Summer!
Logged
When the last deer disappears into the morning mist,
When the last elk vanishes from the hills,
When the last buffalo falls on the plains,
I will hunt mice for I am a hunter and I must have my freedom.
Chief Joseph

Offline hunt it

  • Trad Bowhunter
  • **
  • Posts: 2622
Re: kbaknife put to use at TX Sweat
« Reply #17 on: March 18, 2008, 10:48:00 AM »
Sounds good Karl,no hurry. I like giving the artist all the time he needs to be creative. Sides I don't need all those folks druling all over my knife.
Logged
hunt it

Offline Steve Nuckels

  • Trad Bowhunter
  • **
  • Posts: 2155
Re: kbaknife put to use at TX Sweat
« Reply #18 on: March 22, 2008, 07:46:00 PM »
Just bought the "Brokeback Chairman" Andersen Forge knife!  Can't wait to get my grubby hands on it! (I will wash em before I touch it) My wife got it for me, for our 20th wedding anniversary!  Good woman/wife!
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©