INFO: Trad Archery for Bowhunters



« previous next »
Pages: [1]   Go Down

Author Topic: The "Bowling Ball Vise"  (Read 1084 times)

Offline kbaknife

  • Trad Bowhunter
  • **
  • Posts: 2670
The "Bowling Ball Vise"
« on: January 17, 2009, 01:22:00 PM »
Some of us were showing different shop tools on another forum, and I thought I might post my "bowling ball vise" that was inspired by Joe Keeslar in his Blade Magazine article on Silver wire inlay.
It's sort of my own interpretation, but the idea is the same.
I added a plate to the top of each jaw with additional hole in it to accomodate weird handle shapes, and even larger/wider handle materials.
The idea is for the knife to spin 'round and 'round and you can "chase" the wire inlay pattern with havind to go into strange contorsions and still remain square to the work.
Pretty cool idea.
 

 

 
Logged
When the last deer disappears into the morning mist,
When the last elk vanishes from the hills,
When the last buffalo falls on the plains,
I will hunt mice for I am a hunter and I must have my freedom.
Chief Joseph

Offline sticshooter

  • Trad Bowhunter
  • **
  • Posts: 4210
Re: The "Bowling Ball Vise"
« Reply #1 on: January 17, 2009, 01:33:00 PM »
YEAH BABY..... THATS JUST AWESOME.<><
Logged
The Church of God is an anvil that has worn out many hammers.

"Walk softly..and carry a sharp   Stic."
TGMM

Offline robtattoo

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3588
Re: The "Bowling Ball Vise"
« Reply #2 on: January 17, 2009, 01:36:00 PM »
What a neat idea!  :clapper:
Logged
"I came into this world, kicking, screaming & covered in someone else's blood. I have no problem going out the same way"

PBS & TBT Member

>>---TGMM, Family of the Bow--->

Offline Doug Campbell

  • Trad Bowhunter
  • **
  • Posts: 2608
Re: The "Bowling Ball Vise"
« Reply #3 on: January 17, 2009, 02:10:00 PM »
Well I'll be, you literally meant bowling ball...

Nice, thanks for sharing Karl!  :thumbsup:
Logged
Life is wonderful in Montana!!
"BEING CHALLENGED IN LIFE IS INEVITABLE. BEING DEFEATED IS OPTIONAL."
ABS Journeyman Knifesmith

Offline tippit

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6241
Re: The "Bowling Ball Vise"
« Reply #4 on: January 17, 2009, 02:51:00 PM »
Karl,  I saw that article and think you adaption helps it out.  Good going...tippit
Logged
TGMM Family of the Bow
VP of Consumption MK,LLC

Offline kbaknife

  • Trad Bowhunter
  • **
  • Posts: 2670
Re: The "Bowling Ball Vise"
« Reply #5 on: January 17, 2009, 03:16:00 PM »
Quote
Originally posted by Doug Campbell:
Well I'll be, you literally meant bowling ball...

Nice, thanks for sharing Karl!   :thumbsup:  
Have I ever lied to you?
Logged
When the last deer disappears into the morning mist,
When the last elk vanishes from the hills,
When the last buffalo falls on the plains,
I will hunt mice for I am a hunter and I must have my freedom.
Chief Joseph

Offline TxMoon

  • Trad Bowhunter
  • **
  • Posts: 142
Re: The "Bowling Ball Vise"
« Reply #6 on: January 17, 2009, 08:23:00 PM »
That is the coolest thing! how in the world did you cut that bowling ball? The vice idea is one I will use for my self. That is something I been looking for right there thanks a mil on that one!
Logged
Technique and Knowledge is the largest factor in being able to build a good knife. Lin Rhea

Offline kbaknife

  • Trad Bowhunter
  • **
  • Posts: 2670
Re: The "Bowling Ball Vise"
« Reply #7 on: January 17, 2009, 08:36:00 PM »
A sawzall with a long blade.
Logged
When the last deer disappears into the morning mist,
When the last elk vanishes from the hills,
When the last buffalo falls on the plains,
I will hunt mice for I am a hunter and I must have my freedom.
Chief Joseph

Offline kbaknife

  • Trad Bowhunter
  • **
  • Posts: 2670
Re: The "Bowling Ball Vise"
« Reply #8 on: January 17, 2009, 08:37:00 PM »
More specifically, I built a wooden box around the ball, just an inch or two shorter than the height of the ball, and used the top of the box as a guide for the sawzall blade.
Logged
When the last deer disappears into the morning mist,
When the last elk vanishes from the hills,
When the last buffalo falls on the plains,
I will hunt mice for I am a hunter and I must have my freedom.
Chief Joseph

Offline tippit

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6241
Re: The "Bowling Ball Vise"
« Reply #9 on: January 17, 2009, 08:54:00 PM »
With the vice off that must real thump goin' down the lane.  Probably hurts your score too  :eek:  Thanks for posting that Karl...tippit
Logged
TGMM Family of the Bow
VP of Consumption MK,LLC

Offline vermonster13

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 14572
Re: The "Bowling Ball Vise"
« Reply #10 on: January 17, 2009, 09:31:00 PM »
That is a great use for a bowling ball.
Logged
TGMM Family of the Bow
For hunting to have a future, we must invest ourselves in future hunters.

Offline Kevin Evans

  • Trad Bowhunter
  • **
  • Posts: 1148
Re: The "Bowling Ball Vise"
« Reply #11 on: January 17, 2009, 11:45:00 PM »
Hey Karl does it make a difference what the bowing ball wieghs??
Is heavier better??
Logged

Offline Toecutter

  • Trad Bowhunter
  • **
  • Posts: 866
Re: The "Bowling Ball Vise"
« Reply #12 on: January 18, 2009, 03:21:00 AM »
That is great Karl, It Looks just about perfect!!
Logged
"To be what we are, and to become what we are capable of becoming, is the only end of life." RLS

Offline OconeeDan

  • Trad Bowhunter
  • **
  • Posts: 1685
Re: The "Bowling Ball Vise"
« Reply #13 on: January 18, 2009, 07:16:00 AM »
I cut mine with a bowsaw handsaw, but the saws all would be easier.  
I doubt that weight of ball matters much, they all are 12-16lbs, and then you put a vise on top.  Mine is a small drill press vise as explained in the Blade magazine.  
The way the ball sits on the ring (tire), weight of ball would have little to do with stability.
I found a round plastic trailer jack wheel chock, but a tire would work fine.
Dan
Logged

Offline kbaknife

  • Trad Bowhunter
  • **
  • Posts: 2670
Re: The "Bowling Ball Vise"
« Reply #14 on: January 18, 2009, 07:35:00 AM »
Quote
Originally posted by tippit:
With the vice off that must real thump goin' down the lane.  Probably hurts your score too   :eek:   Thanks for posting that Karl...tippit
I just out a bunch of vaseline on the flat spot and sliiiiiiiiide it down the lane.
Can't get the hook I want, though.
Those splits still elude me.
Logged
When the last deer disappears into the morning mist,
When the last elk vanishes from the hills,
When the last buffalo falls on the plains,
I will hunt mice for I am a hunter and I must have my freedom.
Chief Joseph

Offline kbaknife

  • Trad Bowhunter
  • **
  • Posts: 2670
Re: The "Bowling Ball Vise"
« Reply #15 on: January 18, 2009, 07:37:00 AM »
It's amazing how dense that rubber is. If dan cut his by hand, he can attest to it.
I would say the heavier the better.
From time to time you need to roll that vise over and if the vise is too heavy, it can pull itself over some.
The rubber tire works great as it has some "bite" on rubber-to-rubber.
I wish I had had a little smaller vise, but I really have no complaints so far.
Logged
When the last deer disappears into the morning mist,
When the last elk vanishes from the hills,
When the last buffalo falls on the plains,
I will hunt mice for I am a hunter and I must have my freedom.
Chief Joseph

Offline OconeeDan

  • Trad Bowhunter
  • **
  • Posts: 1685
Re: The "Bowling Ball Vise"
« Reply #16 on: January 18, 2009, 10:10:00 AM »
Karl, with that monster vice you have you need a 20 lb ball!  You could build an engine on yours!
Dan
Logged

Offline kbaknife

  • Trad Bowhunter
  • **
  • Posts: 2670
Re: The "Bowling Ball Vise"
« Reply #17 on: January 18, 2009, 10:37:00 AM »
I need to roll that ball waaaaaaaaaay over before the vise really has any adverse effect.
That rubber tire really bites good.
Logged
When the last deer disappears into the morning mist,
When the last elk vanishes from the hills,
When the last buffalo falls on the plains,
I will hunt mice for I am a hunter and I must have my freedom.
Chief Joseph

Offline Nosight

  • Trad Bowhunter
  • **
  • Posts: 684
Re: The "Bowling Ball Vise"
« Reply #18 on: January 26, 2009, 10:44:00 AM »
I just finished reading the Blade articals on inlay. Did not realize how little in the way of tools was needed.

After going through the tool boxs I found all of the tools on his list. The ball was taken out of the rifle target boxes. Now its just sitting down and learning how to do it.

Hope to see more tuts on inlays. I like the way it makes a handle stand out And add to the overall knife its self..

Later........Buzz
Logged
Remember...aim small miss small...
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©