INFO: Trad Archery for Bowhunters



Author Topic: Sanding Belts  (Read 608 times)

Offline polarbear

  • Trad Bowhunter
  • **
  • Posts: 94
Sanding Belts
« on: January 07, 2010, 09:56:00 PM »
Looking for a supplier for 1"x30"very fine sanding belts. Any help would appreciated!I've already check most the woodworking cat.Thanks John T.
Does your train of thought Have a caboose?

Offline beaver#1

  • Trad Bowhunter
  • **
  • Posts: 911
Re: Sanding Belts
« Reply #1 on: January 07, 2010, 10:30:00 PM »
jantz knife supply might have them.
have i not commanded you? be strong and of good courage;be not afraid or discouraged:for the Lord your God is with you where ever you go. joshua 1:9

Offline Wampus

  • Trad Bowhunter
  • **
  • Posts: 315
Re: Sanding Belts
« Reply #2 on: January 07, 2010, 10:50:00 PM »
Trugrit has them up to 1000 grit.

 http://www.trugrit.com/belts1.htm

Offline polarbear

  • Trad Bowhunter
  • **
  • Posts: 94
Re: Sanding Belts
« Reply #3 on: January 08, 2010, 09:51:00 PM »
THANKS GUYS
Does your train of thought Have a caboose?

Offline bowur

  • Trad Bowhunter
  • **
  • Posts: 52
Re: Sanding Belts
« Reply #4 on: January 10, 2010, 07:33:00 PM »
http://supergrit.com/products/products_belts-blacksc.asp

supergrit has a lot of different sanding belts for pretty cheap

Offline LC

  • Trad Bowhunter
  • **
  • Posts: 1302
Re: Sanding Belts
« Reply #5 on: January 10, 2010, 10:34:00 PM »
I get my belts from Industrial Abrasives [email protected]. I use the "everlast"aluminum oxide belts. They always have a special of buy a dozen get a dozen free so for the 2"x72" belts I use they are $47.25 or $1.96 each. You can mix and match grit sizes so I get a dozen 80grit and a dozen 120 grit. I usually get two knifes per belt or by changing the rotation can get a additional one or 3 knives per belt. Just depends on how much grinding I have to do. Their 1"x 30" belts are $20.85 for 24 belts.
Most people get rich by making more money than they have needs, me, I just reduced my needs!

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©