INFO: Trad Archery for Bowhunters



Author Topic: Custom Knife Makers - Value for the money ?  (Read 558 times)

Offline djanko

  • Trad Bowhunter
  • **
  • Posts: 288
Custom Knife Makers - Value for the money ?
« on: July 05, 2010, 07:06:00 PM »
What are some recommended knife makers who produce a great product for the money?

Online rastaman

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 7895
Re: Custom Knife Makers - Value for the money ?
« Reply #1 on: July 05, 2010, 07:16:00 PM »
The Hunting knives and Crafters forum on this site has a wealth of info on it djanko.  We have a lot of members here who make incredible knives & you would probably be wrapped up in answers over there. You may have already looked there, but in case you hadn't... For a non custom knife, the Helle knife series offers a lot of knife for the money. Dryad bows (wingnut) sells them on their website.   :)
TGMM Family of the Bow

                                                   :archer:                                               

Randy Keene
"Life is precious and so are you."  Marley Keene

Offline djanko

  • Trad Bowhunter
  • **
  • Posts: 288
Re: Custom Knife Makers - Value for the money ?
« Reply #2 on: July 05, 2010, 07:27:00 PM »
Thank you.

Offline Steve Nuckels

  • Trad Bowhunter
  • **
  • Posts: 2155
Re: Custom Knife Makers - Value for the money ?
« Reply #3 on: July 05, 2010, 08:53:00 PM »
There are several to choose from here depending how much you want to spend.  

There are a few pro's and lots of very good part time bladesmiths.

Review some of the posted knives and ask some questions!

Steve
-------
Potomac Forge

Offline B/W lvr

  • Trad Bowhunter
  • **
  • Posts: 144
Re: Custom Knife Makers - Value for the money ?
« Reply #4 on: July 05, 2010, 09:36:00 PM »
I had a Randall in Cambodia that saved my life more than once. Left it in country with a buddie. Never heard from him again but it was a knife to  bet your life on. I can think of none better and own 4 of them and no others. Frank

Offline Ragnarok Forge

  • Trad Bowhunter
  • **
  • Posts: 3034
Re: Custom Knife Makers - Value for the money ?
« Reply #5 on: July 06, 2010, 12:39:00 AM »
Poke around the knife makers forum. You will find some great knife makers there.
Clay Walker
Skill is not born into anyone.  It is earned thru hard work and perseverance.

Offline hunt it

  • Trad Bowhunter
  • **
  • Posts: 2622
Re: Custom Knife Makers - Value for the money ?
« Reply #6 on: July 06, 2010, 07:48:00 AM »
There are some of the best there is right here! Just look at some of the posts and you will see. Talk to someone about what you want and what options you have.
hunt it

Offline joekeith

  • Trad Bowhunter
  • **
  • Posts: 1757
Re: Custom Knife Makers - Value for the money ?
« Reply #7 on: July 06, 2010, 09:22:00 AM »
I'm not meaning to put anyone's work down by any means, but check out some of Linn Rhea's work.  Just awesome.  I can't think of any better lookin', well made knives out there.  Every time he posts pics of a new knife I just sit here and drool......they are all working beauties.  I only wish I could afford one.  :notworthy:    :notworthy:

Offline JL

  • Trad Bowhunter
  • **
  • Posts: 725
Re: Custom Knife Makers - Value for the money ?
« Reply #8 on: July 08, 2010, 07:11:00 PM »
Quote
Originally posted by hunt it:
There are some of the best there is right here! Just look at some of the posts and you will see. Talk to someone about what you want and what options you have.
I couldn't have said it any better. At some point (after I get thru with my Blacktail buying binge...) I'm going to go on a quest to add a knife or two from the knifemakers here. I already have a few but have several more to go. There is some serious talent gracing these pages  :thumbsup:  .
Practice like you are the worst, shoot like you are the best...

Offline pbr

  • Trad Bowhunter
  • **
  • Posts: 79
Re: Custom Knife Makers - Value for the money ?
« Reply #9 on: December 26, 2014, 07:33:00 PM »
Lozada in Brandon Fl.

Offline Antlerhog

  • Trad Bowhunter
  • **
  • Posts: 51
Re: Custom Knife Makers - Value for the money ?
« Reply #10 on: December 28, 2014, 09:02:00 PM »
Well there are some great knife Akers right here you might try contacting but another maker to check out is Bob Dozier out of Arkansas. He makes a great hunting and working knife. Definitely one of the best at what he does. Just google his name. Good luck!

Jay

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©