INFO: Trad Archery for Bowhunters



Author Topic: lookin for a big chopper for shooting lanes  (Read 375 times)

Offline Ian johnson

  • Trad Bowhunter
  • **
  • Posts: 1608
lookin for a big chopper for shooting lanes
« on: August 09, 2010, 10:19:00 AM »
When I walk in the woods I usually carry two knives while hunting, one of my many hunting knives usually with a 3 or 4in blade in my pack and a pocket knife or neck knife for general utility. I dont normally like big knives but lately I have seen a use for mabey a camp knife with a 6 or 7in blade for clearing shooting lanes and building brush blinds during bow season, can I get some picks of your choppers to get some ideas for making one and can someone recomend a good factory one I can get before I get around to making one?

thanks
Ian
ARTAC member
53@29 sheepeater shaman recurve
52@29 66 bear grizzly
51@29 dryad orion td longbow

Offline Tim Fishell

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 3772
Re: lookin for a big chopper for shooting lanes
« Reply #1 on: August 09, 2010, 10:24:00 AM »
These are the two that I carry for making brush blinds and clearing lanes.  

 http://www.shrewbows.com/shrewhawk/

 https://virt1.enter.net/~woodmanspal/tools.html
Dreams can not be bought; they are free to those who have lived. -Mike Mitten

We must go beyond the textbooks, go out into the untrodden depths of the wilderness & travel & explore & tell the world the glories of our journey

TGMM Family of the Bow

Offline Tique

  • Trad Bowhunter
  • **
  • Posts: 581
Re: lookin for a big chopper for shooting lanes
« Reply #2 on: August 09, 2010, 07:15:00 PM »
I'll 2nd what Tim said. I got a "hawk" last year and IMO it is the best for clearing and building blinds.
Untested ideas are not facts.

Offline robtattoo

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3588
Re: lookin for a big chopper for shooting lanes
« Reply #3 on: August 09, 2010, 10:15:00 PM »
Without wanting to put you off, a 6 or 7 inch blade isn't really big enough for clearing brush. If you really want a knife or chopper, go bigger. 10" or larger would be a lot more use. a 6" knife simply doesn't have the weight in it's blade to chop very well. By the time you're at 10" the blade weighs more than the handle (usually) which is essential in a chopping/slashing blade. This is where my 15" bladed Khukri really comes into it's own   :D  
To be perfectly honest you'd get a lot more use out of a good pair of pruning shears & a folding saw.
"I came into this world, kicking, screaming & covered in someone else's blood. I have no problem going out the same way"

PBS & TBT Member

>>---TGMM, Family of the Bow--->

Offline Ian johnson

  • Trad Bowhunter
  • **
  • Posts: 1608
Re: lookin for a big chopper for shooting lanes
« Reply #4 on: August 09, 2010, 10:23:00 PM »
thanks rob I found a nice big khukri today that I plan on using, oh and I almost never go in the woods without that neck knife you made me
ARTAC member
53@29 sheepeater shaman recurve
52@29 66 bear grizzly
51@29 dryad orion td longbow

Offline Lamey

  • Trad Bowhunter
  • **
  • Posts: 1677
Re: lookin for a big chopper for shooting lanes
« Reply #5 on: August 10, 2010, 06:08:00 AM »
Ide say a big 10-12" Bowie style chopper works best in the woods, at least it does for me.  I can cut about anything a small axe/hatchet can,  and also do alot more with it if need be.

Offline Scott Roush

  • Trad Bowhunter
  • **
  • Posts: 693
Re: lookin for a big chopper for shooting lanes
« Reply #6 on: August 10, 2010, 08:55:00 AM »
These are the kind of choppers I've been making..

This one is 14" over all...

 

Offline JustinNC

  • Trad Bowhunter
  • **
  • Posts: 82
Re: lookin for a big chopper for shooting lanes
« Reply #7 on: August 10, 2010, 09:02:00 AM »
I had a woodsmans pal and I used to carry a machette for a living. I HATED HATED HATED the woodsmans pal. Best thing I ever saw was either a Christmas tree pruner that looked like a break knife, or better yet, a homemade machette a co-worker had that was made from an old handsaw blade, had a leadfilled pipe handle. Absolutely deadly on anything it came in contact with.

Offline hunt it

  • Trad Bowhunter
  • **
  • Posts: 2622
Re: lookin for a big chopper for shooting lanes
« Reply #8 on: August 10, 2010, 11:10:00 AM »
I use a STIHL 036 with a 20" bar it's great for clearing shooting lanes.  :bigsmyl:  

Haven't found a nice sheath for it yet!
hunt it

Offline tippit

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6239
Re: lookin for a big chopper for shooting lanes
« Reply #9 on: August 10, 2010, 01:30:00 PM »
Big & Small Choppers...tippit

 
TGMM Family of the Bow
VP of Consumption MK,LLC

Offline sticshooter

  • Trad Bowhunter
  • **
  • Posts: 4210
Re: lookin for a big chopper for shooting lanes
« Reply #10 on: August 10, 2010, 01:43:00 PM »
OOOOOOOOO ....DOC I LIKE THAT BIG ONE ALOT.WHATS THE SPECS ON THAT SWEETHEART?<><
The Church of God is an anvil that has worn out many hammers.

"Walk softly..and carry a sharp   Stic."
TGMM

Offline Scott Roush

  • Trad Bowhunter
  • **
  • Posts: 693
Re: lookin for a big chopper for shooting lanes
« Reply #11 on: August 10, 2010, 02:59:00 PM »
that chopper is just awesome tippit. really.... awesome piece of work.  that design is similar to what I have in mind to make for myself. Reminds me of the Sooke Mountain.

Offline amar911

  • Trad Bowhunter
  • **
  • Posts: 2860
Re: lookin for a big chopper for shooting lanes
« Reply #12 on: August 14, 2010, 10:43:00 PM »
Jeff,

I sure like that pair of knives. If I could make knives I would like to make some just like them, but unfortunately I do not have that talent. I am always drooling when I see your knives.

Allan
TGMM Family of the Bow

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©