INFO: Trad Archery for Bowhunters



Author Topic: Camp Bowie  (Read 1394 times)

Offline James Oertel

  • Trad Bowhunter
  • **
  • Posts: 109
Re: Camp Bowie
« Reply #20 on: November 18, 2010, 08:13:00 PM »
:thumbsup:     :clapper:
life is too short,enjoy it !!!

Offline Bobby Urban

  • Trad Bowhunter
  • **
  • Posts: 1211
Re: Camp Bowie
« Reply #21 on: November 19, 2010, 11:33:00 AM »
"its pretty rare for me to make a full tang handle"  

Well you should start making more because it is obvious that you are great at it.  I love the look of a full tang and with tapers like that and the etch throughout - awesome!  How in the world did you get the perfect handle match without damage to the etch?  Knife artistry at it's finest!  Very good job.

Bob Urban

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Re: Camp Bowie
« Reply #22 on: November 19, 2010, 11:54:00 AM »
Bobby,
        That is a good question. I had to go about it like this:

 - completely (actually about 99 percent)finish the blade with the exception of the etch

 - fit the guard and drill the hole through the guard and blade. Temporarily pin the guard.

 - fit and drill the handle scale to the predrilled holes in the tang. Use two temporary pins, one front, one rear of the handle.

 - shape the handle to fit the tang and guard. This means completely shaped and contoured.

 - punch out temporary pins and disassmeble the knife.

 - finalize the finish on the blade and etch it.

 - put the guard on and pien the new pin permanently and clean it up. Be VERY careful.

 - put the scales on and pin them permanently.
 

 - touch up and clean up the excess epoxy.
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28

Offline Kevin Evans

  • Trad Bowhunter
  • **
  • Posts: 1148
Re: Camp Bowie
« Reply #23 on: November 19, 2010, 02:28:00 PM »
WOW Lin thats amazing.

I have been trying to figure out how you did that for days.(since you posted)I seem to do that alot nowdays.Best I could come up with was a soidierd guard from behind and covering everything up with fingernai polish before etching.LOL Guess now I'll try and figure out how and where the pins are and where.

By the way nice pattern and great job,I have trouble putting that distil taper in handle tang,and getting perfect fit on wood. LOL

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Re: Camp Bowie
« Reply #24 on: November 19, 2010, 03:00:00 PM »
One thing I did not mention is that there is a notch in the bottom of the handle tang for the guard to fit into. It only about 1/8 or so. Just to keep the bottom of the guard secure and allow only one pin in the upper 1/3 of the guard. This notch is tight with zero slack. That makes for a very strong connection between the guard and the blade.
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28

Offline Bobby Urban

  • Trad Bowhunter
  • **
  • Posts: 1211
Re: Camp Bowie
« Reply #25 on: November 20, 2010, 08:47:00 AM »
I just stare at that knife in awe - Your patience is imeasurable.  Very cool Lin.  I know it is a Ford/Chevy thing as far as what is better/stronger - full tang vs. hidden. And I know the take downs are just really cool and very engineered but I just love the look of a full tang knife and this one is, well, awesome!  

I am inspired again to get back to the shop and start pounding some steel.  I hope we do the swap again this year because I took last year off for "just did not have enough time" reasons and have been looking forward to it all year.

Bob Urban

Offline Lamey

  • Trad Bowhunter
  • **
  • Posts: 1677
Re: Camp Bowie
« Reply #26 on: November 21, 2010, 10:06:00 AM »
Lin that thing is just too pretty,   great work as always.

Offline jomama

  • Trad Bowhunter
  • **
  • Posts: 252
Re: Camp Bowie
« Reply #27 on: November 25, 2010, 11:21:00 AM »
Nice stuff.

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Re: Camp Bowie
« Reply #28 on: November 25, 2010, 01:49:00 PM »
Thanks guys. If I can do it you can do it.

I have  a friend who is learning to make knives. Actually he has made knives for a while and is older than me and accomplished at wood carving and other things. He and I use a term to describe the stubborn attitude you have to have to make knives and suffer critique to the point of significant improvement. We call it "boar hog tough".
         This stubborn attitude tempered with  the humility to accept criticism is a combination we have agreed to adopt. It has helped us both to learn and make improvements. This has to be a conscious decision otherwise human nature will get in the way and stop improvement.
        I know you did not ask for that, so ignor what you want. I'm just lettin you know that you can do it too, you just have to be boar hog tough.
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28

Offline Rainorshine

  • Trad Bowhunter
  • **
  • Posts: 4
Re: Camp Bowie
« Reply #29 on: November 27, 2010, 12:20:00 PM »
can't see myself using this knife for camp duties... this is a work of art!

Offline NJSwampstalker

  • Trad Bowhunter
  • **
  • Posts: 122
Re: Camp Bowie
« Reply #30 on: November 27, 2010, 09:04:00 PM »
Your work is absolutely amazing!  :notworthy:

Offline Roughcountry

  • Trad Bowhunter
  • **
  • Posts: 1112
Re: Camp Bowie
« Reply #31 on: November 27, 2010, 09:48:00 PM »
Wow Lin. Thats one very nice blade.

Do you rent boar hog tough?

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Re: Camp Bowie
« Reply #32 on: November 28, 2010, 07:17:00 AM »
No Robin, everyone has it, some just dont realize it.

Thanks
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28

Offline Roughcountry

  • Trad Bowhunter
  • **
  • Posts: 1112
Re: Camp Bowie
« Reply #33 on: November 29, 2010, 08:54:00 AM »
:)  Thats what I thought Lin.

Where did the balance point end up on your blade?
I sure like a tapered tang, it really sets the scales off.

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Re: Camp Bowie
« Reply #34 on: November 29, 2010, 10:40:00 AM »
On this knife the balance point is just in front of the guard. Right at the ricasso. The blade is tapered and the tang is tapered so the weight is centered in the middle of the knife. Thanks.
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28

Offline Track

  • Trad Bowhunter
  • **
  • Posts: 553
Re: Camp Bowie
« Reply #35 on: December 18, 2010, 01:53:00 PM »
Beautiful and original as always Lin.

Offline amar911

  • Trad Bowhunter
  • **
  • Posts: 2860
Re: Camp Bowie
« Reply #36 on: December 18, 2010, 04:46:00 PM »
Lin makes masterpieces, and this is definitely one of them!

Allan
TGMM Family of the Bow

Offline 2treks

  • Trad Bowhunter
  • **
  • Posts: 5193
Re: Camp Bowie
« Reply #37 on: December 18, 2010, 05:44:00 PM »
I know I already said it once but,DANG! That thing is sweet.
C.A.Deshler
United States Navy.
1986-1990


"Our greatest fear should not be of failure but of succeeding at things in life that don't really matter.”
~ Francis Chan

Offline jomama

  • Trad Bowhunter
  • **
  • Posts: 252
Re: Camp Bowie
« Reply #38 on: December 19, 2010, 04:01:00 PM »
Great as always.

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©