INFO: Trad Archery for Bowhunters



« previous next »
Pages: [1]   Go Down

Author Topic: Which Grinder  (Read 767 times)

Offline D.J. Smith

  • Trad Bowhunter
  • **
  • Posts: 47
Which Grinder
« on: May 20, 2011, 05:18:00 AM »
I'am in the maket for a grinder. If you had to choose just one grinder, which one would it be????
Logged

Offline madness522

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 1743
Re: Which Grinder
« Reply #1 on: May 20, 2011, 06:20:00 AM »
KMG every day of the week and twice on sunday!
Logged
Barry Clodfelter
TGMM Family of the Bow.

Offline Scott Roush

  • Trad Bowhunter
  • **
  • Posts: 693
Re: Which Grinder
« Reply #2 on: May 20, 2011, 06:51:00 AM »
I love my KMG but other than the Craftsman 2x42, I know nothing else.  Go big on the motor!
Logged

Offline kbaknife

  • Trad Bowhunter
  • **
  • Posts: 2670
Re: Which Grinder
« Reply #3 on: May 20, 2011, 07:30:00 AM »
I've been running my Bader BIII flat out for almost 10 years.
I love the variety of tooling and the ease of changing from one contact type to another.
Not matter what you get, your best friend in knife making will be variable speed.

 http://www.stephenbader.com/
Logged
When the last deer disappears into the morning mist,
When the last elk vanishes from the hills,
When the last buffalo falls on the plains,
I will hunt mice for I am a hunter and I must have my freedom.
Chief Joseph

Offline Philthy

  • Trad Bowhunter
  • **
  • Posts: 21
Re: Which Grinder
« Reply #4 on: May 21, 2011, 10:22:00 PM »
Absolutely dig my KMG but have also used a Bader and they are top notch as well.  I have limited time on a Coote with Barry and Philip Jones (Jones Brothers Knives) but thinking about getting one to dedicate to flat grinding due to the long belt area available due to the two wheel design.

Second on variable speed and do not cheat yourself with a wimpy motor - you will regret it.
Logged
Your hero carries a ball- mine carries a service rifle.

Offline 2treks

  • Trad Bowhunter
  • **
  • Posts: 5193
Re: Which Grinder
« Reply #5 on: May 22, 2011, 07:34:00 AM »
Phillip, How did you like the Coote? I am thinking to get one for my bow work. It sure looks like a good set up for the money. I already have a nice 1hp motor. Do you know of a vari-speed attachment for it?
Logged
C.A.Deshler
United States Navy.
1986-1990


"Our greatest fear should not be of failure but of succeeding at things in life that don't really matter.”
~ Francis Chan

Offline jaymoon

  • Trad Bowhunter
  • **
  • Posts: 18
Re: Which Grinder
« Reply #6 on: May 22, 2011, 08:14:00 AM »
Another vote for KMG.
Logged

Offline Philthy

  • Trad Bowhunter
  • **
  • Posts: 21
Re: Which Grinder
« Reply #7 on: May 22, 2011, 05:18:00 PM »
I liked the Coote fine the way the Jones brothers had it set up.  They had a long platen and a variabale rest plate that allowed you to walk the blade in for very precise control.  I do not know how well it would work for bows.  How are you planning to use it?  Grinding laminations or taking down/tillering a self bow?

I believe Bader and KMG both sell variable speed drives and controls separately.  Sometimes you can find them on **** but I cannot vouch for those.  I believe you need a DC motor.
Logged
Your hero carries a ball- mine carries a service rifle.

Offline D.J. Smith

  • Trad Bowhunter
  • **
  • Posts: 47
Re: Which Grinder
« Reply #8 on: May 24, 2011, 11:30:00 AM »
Thanks for all the info, I think I'll order me a KMG with a 2 h.p. motor and varible speed.
Logged

Offline jaymoon

  • Trad Bowhunter
  • **
  • Posts: 18
Re: Which Grinder
« Reply #9 on: May 24, 2011, 02:26:00 PM »
While you are at it look into the small wheel set up as well. Now that I've got one I don't know how I did without it. Moon.
Logged

Offline J Reeves

  • Trad Bowhunter
  • **
  • Posts: 63
Re: Which Grinder
« Reply #10 on: May 24, 2011, 03:33:00 PM »
I have the KMG with a DC motor and its a hog man if you can go with the DC motor you will be glad you did
Logged
Technique and Knowledge is the largest factor in being able to build a good knife. Lin Rhea

Offline Philthy

  • Trad Bowhunter
  • **
  • Posts: 21
Re: Which Grinder
« Reply #11 on: May 24, 2011, 10:47:00 PM »
+++ on both the 2hp motor and the small wheel setup.  Both are great ideas.
Logged
Your hero carries a ball- mine carries a service rifle.

Offline 2treks

  • Trad Bowhunter
  • **
  • Posts: 5193
Re: Which Grinder
« Reply #12 on: May 24, 2011, 10:53:00 PM »
No lam work or tillering. I would use it for cleaning up glue-ups and opening the sight window. Thanks for the info. I have drooled for a KMG for a few years now but I can't spend that much for what I want to do. The coote also has some unique attachments available. small wheel is one.
Logged
C.A.Deshler
United States Navy.
1986-1990


"Our greatest fear should not be of failure but of succeeding at things in life that don't really matter.”
~ Francis Chan

Offline D.J. Smith

  • Trad Bowhunter
  • **
  • Posts: 47
Re: Which Grinder
« Reply #13 on: May 25, 2011, 05:30:00 AM »
Sounds like everybody is for the 2 hp DC motor,variable speed,and the small wheel attachment. Thanks
Logged

Offline David Ricke

  • Trad Bowhunter
  • **
  • Posts: 106
Re: Which Grinder
« Reply #14 on: June 06, 2011, 08:36:00 PM »
The Bader is a very well thought out machine. I own three.  Good Hunting  Knifemaker
Logged

Offline Ringneck

  • Trad Bowhunter
  • **
  • Posts: 978
Re: Which Grinder
« Reply #15 on: June 07, 2011, 12:40:00 PM »
I have had a KMG since he first introduced them and it has been a great machine. Mine has a 3 HP motor on it. Very versatile machine. If price was not an issue I would be checking out Bob Doziers grinder.
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©