INFO: Trad Archery for Bowhunters



« previous next »
Pages: [1]   Go Down

Author Topic: Matching knife to bow?  (Read 1133 times)

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Matching knife to bow?
« on: July 04, 2011, 11:33:00 AM »
I have a new Tall Tines of the following look. Charcoal Diamondwood with Walnut stripe. I am going to make me a knife to match, but am trying to decide just how to configure the woods on the handle. Have you guys done this? Got any pictures of the knife? Here's the riser.

 
Logged
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28

Offline gudspelr

  • Trad Bowhunter
  • **
  • Posts: 990
Re: Matching knife to bow?
« Reply #1 on: July 04, 2011, 12:09:00 PM »
I sure like the looks of those two woods together.  I've not done a knife like what you're talking about, but have seen several.  Some had one wood up front (almost like bolsters) with he second making up the rear 2/3 of the handle.  I'd be curious to see yours with two pieces of the darker diamondwood with a small stripe of Walnut on an angle somewhere in between.  You could even use some black liner material on either side of the Walnut like it appears to have on your riser.

What kind of blade you thinking about making?  Whatever direction you go, I'll put money up that says it'll look great.   :)   Thanks again for chatting this morning-off to the airport in a bit.

Jeremy
Logged
"Have nothing in your house that you do not know to be useful, or believe to be beautiful."
- William Morris

Craftsmen strive to make their products both.

Offline kbaknife

  • Trad Bowhunter
  • **
  • Posts: 2670
Re: Matching knife to bow?
« Reply #2 on: July 04, 2011, 12:35:00 PM »
Lin, right now I'm doing a knife of Stabilized Myrtle to match a guy's custom guitar!
I've also been working with Chad Holm of Holm Made Bows to collaborate on some bow/knife combos, but have yet to take that concept to fruition.
I hope you keep us informed on your progress on that project 'cause I could sure use some ideas!
Logged
When the last deer disappears into the morning mist,
When the last elk vanishes from the hills,
When the last buffalo falls on the plains,
I will hunt mice for I am a hunter and I must have my freedom.
Chief Joseph

Offline Ragnarok Forge

  • Trad Bowhunter
  • **
  • Posts: 3034
Re: Matching knife to bow?
« Reply #3 on: July 04, 2011, 01:55:00 PM »
I have made a few to match.  I talk to the bowyer and get the sight window cutout from that bow or a matching bow.   You can run the stripe diagonally across the handle, full length of the handle, or do a bolster, handle combo.  One trick it to use a full tang on the knife and adjust the handle shape to show the wood combo to it's fullest.

I messed up the pins so I kept this one.

   

   

BMA posted a thread last December on a bunch of knives he made in my shop with a few bow cut out handles.  http://tradgang.com/noncgi/ultimatebb.php?ubb=get_topic;f=110;t=002898
Logged
Clay Walker
Skill is not born into anyone.  It is earned thru hard work and perseverance.

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Re: Matching knife to bow?
« Reply #4 on: July 04, 2011, 04:34:00 PM »
Brian of TT archery gave me some of the cut off blocks, so I thought I would try to make one to keep. I really appreciate the suggestions and the photos. I have time to look at more before I make it so dont be shy. Thanks, Lin
Logged
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28

Offline 4est trekker

  • Trad Bowhunter
  • **
  • Posts: 1393
Re: Matching knife to bow?
« Reply #5 on: July 04, 2011, 05:05:00 PM »
I have a suggestion...if your bow wasn't so pretty, then your knife wouldn't have to be either.  In that case, you'd have an easy time matching 'em up!     :biglaugh:    Can't wait to see what you come up with.  :)
Logged
"Walk softly...and carry a bent stick."

"And whatever you do, whether in word or deed, do it all in the name of the Lord Jesus Christ, giving thanks to God the Father through him."  Col. 3:17

Offline kbaknife

  • Trad Bowhunter
  • **
  • Posts: 2670
Re: Matching knife to bow?
« Reply #6 on: July 04, 2011, 05:27:00 PM »
Anything noteworthy for limb tips on that?
Logged
When the last deer disappears into the morning mist,
When the last elk vanishes from the hills,
When the last buffalo falls on the plains,
I will hunt mice for I am a hunter and I must have my freedom.
Chief Joseph

Offline tippit

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6241
Re: Matching knife to bow?
« Reply #7 on: July 04, 2011, 05:33:00 PM »
Lin,
I hesitate to show you this as it was one of my early knives that I tried to match up to a friend's Morrison riser.  I'd like to have the knife back to at least re-grind it   :knothead:   Jeff

 

 
Logged
TGMM Family of the Bow
VP of Consumption MK,LLC

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Re: Matching knife to bow?
« Reply #8 on: July 04, 2011, 06:23:00 PM »
I've got black, white, walnut, and red to choose from.
 
 
Logged
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28

Offline Bodork

  • Trad Bowhunter
  • **
  • Posts: 1592
Re: Matching knife to bow?
« Reply #9 on: July 04, 2011, 09:44:00 PM »
Lin, I made my pastor friend a Christmas gift knife to match the bow he had me make for him. His bow is grey actionwood,ebony and bacote. I used the same woods for his knife.
 
   
   
Logged

Offline Nook

  • Trad Bowhunter
  • **
  • Posts: 900
Re: Matching knife to bow?
« Reply #10 on: July 05, 2011, 10:35:00 AM »
Hey Lin,  I had Norm Johnson send me some wood from the Blacktail he built for me.  Cocobolo and Bocote.  I sent it to Doug Campbell for a knife I ordered.  Here was the result:

 

Jeff
Logged
"After all, it is not the killing that brings satisfaction; it is the contest of skill and cunning. The true hunter counts his achievement in proportion to the effort involved and the fairness of the sport." Dr. Saxton Pope
PBS Regular

Offline L. Harris

  • Trad Bowhunter
  • **
  • Posts: 335
Re: Matching knife to bow?
« Reply #11 on: July 05, 2011, 05:41:00 PM »
Wow! There are some really nice combos on out there!
Logged
Traditional Bowhunting: Cunning and stealth, not gadgets and gizmos!

Offline mater

  • Trad Bowhunter
  • **
  • Posts: 419
Re: Matching knife to bow?
« Reply #12 on: July 05, 2011, 09:16:00 PM »
If something happens, Ive got some of that gray scrap left over also.

 Mark
Logged

Offline 2treks

  • Trad Bowhunter
  • **
  • Posts: 5193
Re: Matching knife to bow?
« Reply #13 on: July 06, 2011, 09:06:00 AM »


 

KHalverson put a number of knives together for me but I can only find pictures of these two. The coco/bacote is my favorite. I dod alot of I-Beam risers and he will turn the cut-off on edge to use the contrasting wood as a liner of sorts.That is how the walnut/maple is done.
can't wait to see what you come up with Lin.
Also check this thread out for another knife set up with scrap wood.Just put your sunglasses on first.  :goldtooth:  
 http://tradgang.com/noncgi/ultimatebb.php?ubb=get_topic;f=1;t=105499;p=1
Logged
C.A.Deshler
United States Navy.
1986-1990


"Our greatest fear should not be of failure but of succeeding at things in life that don't really matter.”
~ Francis Chan

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Re: Matching knife to bow?
« Reply #14 on: July 06, 2011, 11:42:00 AM »
Yall are showing some pretty work. I appreciate seeing them. It might take me a few weeks to come up with something. I have been stretched thin. Well,....you know what I mean.
Logged
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28

Offline m midd

  • Trad Bowhunter
  • **
  • Posts: 1072
Re: Matching knife to bow?
« Reply #15 on: July 08, 2011, 01:39:00 AM »


The knife doesnt but the sheath does.. This is my second attempt.
Logged
Traditional Bowhunters of Arkansas

Offline Roadkill

  • Trad Bowhunter
  • **
  • Posts: 2675
Re: Matching knife to bow?
« Reply #16 on: July 09, 2011, 10:47:00 PM »
Tim Meigs saved me scraps and I made my scales to match the riser. Aim a novice compared to you all, but I like it
Logged
Cast a long shadow-you may provide shade to someone who needs it.  Semper Fi

Offline imskippy

  • Trad Bowhunter
  • **
  • Posts: 805
Re: Matching knife to bow?
« Reply #17 on: July 12, 2011, 12:12:00 AM »
Lin, Ive done quite a few different ones. unfortunately I havent touched my workbench in atleast a year. Being a homeowner, a husband, father of 3 beautiful children and working 6 days a week just doesnt leave anyh time for fun!
I'll post a few of my favorites.

 

 

 
Logged
Zona Custom T/D #1
Zona Custom R/D L/B #1

Offline Kip

  • Trad Bowhunter
  • **
  • Posts: 1720
Re: Matching knife to bow?
« Reply #18 on: July 12, 2011, 08:07:00 AM »
I have posted this before.Not a knife maker but Rob Lee sent the dropoff of my riser so I made a handle,file handle(not finished in pic) and T-handle allen wrench with the dropoff Helle blade.Imskippy those above and all the rest are great.Kip
 
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©