INFO: Trad Archery for Bowhunters



Author Topic: THL Jr Frame Lock Flipper  (Read 1100 times)

Offline Doug Campbell

  • Trad Bowhunter
  • **
  • Posts: 2608
THL Jr Frame Lock Flipper
« on: August 20, 2015, 06:29:00 PM »
Hey Guys, it's been another crazy summer here on the Ranch. I try and check in here often but haven't posted much. I have made a little time for playing in the shop. Last April I drew up and built a Flipper that some of have seen. I had a couple requests for a bit smaller version so downsized every thing and here she is.

I struggled to come up with a catchy name for my Flipper but just couldn't nail anything down. Since it all started with trying to design something Thin, Handy and light I've decided to just call it the THL Flipper. Real catchy right...    ;)

Well anyway here is the first THL Jr Flipper. Ti Frame, clip, screws, SS caged bearings, and my own Damacus blade. 2 15/16” blade, 6 7/8”oal, .313” thick not counting clip and comes in at a whopping 2.1oz. She's very quick and snappy and I'm very happy with the design but I certainly am open for constructive suggestions. We'll see if I can get this short video to load.
   THL Jr Flipper  
   
     
   
Life is wonderful in Montana!!
"BEING CHALLENGED IN LIFE IS INEVITABLE. BEING DEFEATED IS OPTIONAL."
ABS Journeyman Knifesmith

Offline jcprintz

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 303
Re: THL Jr Frame Lock Flipper
« Reply #1 on: August 20, 2015, 06:51:00 PM »
OUTSTANDING. Nuff said
TGMM,Family of the Bow

Offline jcprintz

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 303
Re: THL Jr Frame Lock Flipper
« Reply #2 on: August 20, 2015, 06:52:00 PM »
OUTSTANDING. Nuff said
TGMM,Family of the Bow

Offline larry

  • Trad Bowhunter
  • **
  • Posts: 1146
Re: THL Jr Frame Lock Flipper
« Reply #3 on: August 20, 2015, 09:44:00 PM »
Oh that's sweet, minus the belt clip never really cared for belt clips.   :thumbsup:

Offline Steve Nuckels

  • Trad Bowhunter
  • **
  • Posts: 2155
Re: THL Jr Frame Lock Flipper
« Reply #4 on: August 20, 2015, 10:49:00 PM »
Doug, I have missed seeing you here, I realize running a ranch takes up most of the year. I was looking through the Knives 2015 enjoying all your work in that edition.

It is great seeing your post.

Very nice folder, I would be carrying that every day!

Steve
---------
Potomac Forge
Member, W.F. Moran Jr. Museum & Foundation
ABS AP

Offline just_a_hunter

  • Corporate Sponsor
  • Trad Bowhunter
  • ****
  • Posts: 1086
Re: THL Jr Frame Lock Flipper
« Reply #5 on: August 21, 2015, 04:25:00 AM »
Sheesh... Amazing, buddy.

Todd
"Before you get down on yourself  because you don't have the things you want, think of all the things you DON'T want that you don't have."

You'll notice the "luckiest" elk hunters have worn out boots.

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Re: THL Jr Frame Lock Flipper
« Reply #6 on: August 21, 2015, 09:04:00 AM »
I was talking to someone yesterday on the phone about you Doug. You have inspired a lot of folks around here and this knife is another reason. Exceptional work.    :campfire:
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28

Offline Doug Campbell

  • Trad Bowhunter
  • **
  • Posts: 2608
Re: THL Jr Frame Lock Flipper
« Reply #7 on: August 22, 2015, 01:39:00 PM »
Really appreciate the kind words guys. There is a whole bunch of talent on the little forum of ours and I'm tickled to be part of it.

Oh and the clip comes off easy Larry.  ;)
Life is wonderful in Montana!!
"BEING CHALLENGED IN LIFE IS INEVITABLE. BEING DEFEATED IS OPTIONAL."
ABS Journeyman Knifesmith

Offline Mike Gerardi

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2142
Re: THL Jr Frame Lock Flipper
« Reply #8 on: August 31, 2015, 05:37:00 PM »
I don't know where you get all you inspiration from Buddy. That knife is too cool. Very nice!

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©