« previous next »
Pages: [1]   Go Down

Author Topic: Custom coin maker?  (Read 796 times)

Offline Apex Predator

  • Trad Bowhunter
  • **
  • Posts: 3372
Custom coin maker?
« on: February 06, 2009, 02:38:00 PM »
I'm thinking seriously about having some custom coins made to inset in my risers.  Do you guys have any sources that I should check out?
Logged
I didn't claw my way to the top of the food chain to eat vegetables!

Offline Apex Predator

  • Trad Bowhunter
  • **
  • Posts: 3372
Re: Custom coin maker?
« Reply #1 on: February 06, 2009, 03:06:00 PM »
Through research, I have determined that a "die struck" 3/4" lapel pin is what I need.  Maybe copper or bronze would look great.  There are many, many suppliers though!!
Logged
I didn't claw my way to the top of the food chain to eat vegetables!

Online ChristopherO

  • Trad Bowhunter
  • **
  • Posts: 930
Re: Custom coin maker?
« Reply #2 on: February 06, 2009, 03:30:00 PM »
Marty,
That is a good idea.  Ever since I saw the build along by RGK of his son's bow I thought that was a dandy addition to a project.
Let us know what you decide on.
Christopher
Logged

Offline JEFF B

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 8246
Re: Custom coin maker?
« Reply #3 on: February 06, 2009, 03:40:00 PM »
what about your state coin cost ya nothing but ya time putting it in to the riser and everyone has a coin or two in there pockets so use the GA coin   :thumbsup:
Logged
'' sometimes i wake up Grumpy;
other times i let her sleep"

TGMM FAMILY OF THE BOW

Offline Apex Predator

  • Trad Bowhunter
  • **
  • Posts: 3372
Re: Custom coin maker?
« Reply #4 on: February 06, 2009, 04:23:00 PM »
Most are too large to fit my risers.  A quarter would be too big at almost an inch across.  I think it needs to be small, so it doesn't look like too much.  A dime is almost 3/4" and just a little smaller than what I need.
Logged
I didn't claw my way to the top of the food chain to eat vegetables!

Offline msamn

  • Trad Bowhunter
  • **
  • Posts: 25
Re: Custom coin maker?
« Reply #5 on: February 06, 2009, 07:01:00 PM »
you might try custom coin makers who make coins for geocaching(treasure hunting with GPS). Or custom pin makers. Try crownawards.com or allaboutpins.com
Logged

Offline Jason Kendall

  • Trad Bowhunter
  • **
  • Posts: 1210
Re: Custom coin maker?
« Reply #6 on: February 06, 2009, 09:40:00 PM »
Sent you an email Apex.
Logged

Offline Steve J

  • Trad Bowhunter
  • **
  • Posts: 15
Re: Custom coin maker?
« Reply #7 on: February 06, 2009, 09:50:00 PM »
Apex, try Trophy Shops for coins.  They should be able to design you anything you want.  We get our custom military coins from a big trophy shop here in OKC, OK.

Steve
Logged
Two have paid the ultimate sacrifice for you... Jesus and the US Soldier

Offline Apex Predator

  • Trad Bowhunter
  • **
  • Posts: 3372
Re: Custom coin maker?
« Reply #8 on: February 07, 2009, 10:45:00 AM »
Thanks guys!  I just got a quote from these folks: emblematics.com.  They will make me a lot of 100 @ 1.61 each.  Pretty good, I think.  I'm working on the design now.
Logged
I didn't claw my way to the top of the food chain to eat vegetables!

Offline TimZeigler

  • Trad Bowhunter
  • **
  • Posts: 986
Re: Custom coin maker?
« Reply #9 on: February 09, 2009, 04:38:00 PM »
Marty,

I did mine on a versa laser, using some left over phenolic.  It worked well but I agree, the coins would look much more professional.  I thought about have some done before the laser deal.  Tim
Logged
USMC 1992-2000
PBS Associate Member
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©