Author Topic: tempering a bow  (Read 821 times)

Offline bubby

  • Trad Bowhunter
  • **
  • Posts: 258
tempering a bow
« on: February 11, 2009, 02:20:00 PM »
my father in-law says that they temper there hawk handeles and ramrods by soaking in anti-freeze. anyone out there used this method

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15007
Re: tempering a bow
« Reply #1 on: February 11, 2009, 03:46:00 PM »
I have never tried that method. I doubt it has the same effects as heat tempering bow bellies.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline razorback

  • Trad Bowhunter
  • **
  • Posts: 2166
Re: tempering a bow
« Reply #2 on: February 11, 2009, 09:40:00 PM »
I have spoken to a guy who makes gun stocks and he said he does that but in an effort to stop checking. I looked into it for a table top I was going to make from a large log cross section. there is a chemical that is very similar to the one in anti-freeze that is used to prevent wood checking. it somehow gets into the cells and replaces the water, making the cell stable. This chemical is close to anti-freeze, but it is not the same and from the research I did it seems that the anti-freeze is actually useless for this purpose. I do not have any experience with using either and you may be talking about something else.
Keep the wind in your face and the sun at your back.

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15007
Re: tempering a bow
« Reply #3 on: February 11, 2009, 11:25:00 PM »
Anti-freeze is basically glycerin and alcohol(Glycol)...at least the old stuff was.  Like on snake skins(a curing method) the alcohol carries the glycerin into the cells and displaces the water then the alcohol evaporates and leaves the glycerin in the cells. I can see how it would help prevent checking but I wouldn't want to handle it on a regular basis.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Roy Steele

  • Trad Bowhunter
  • **
  • Posts: 1087
Re: tempering a bow
« Reply #4 on: February 12, 2009, 07:22:00 AM »
I've never heard of that with bow wood.
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
 20 YEARS LEARNING 20 YEARS DOING  20 YEARS TEACHING
  CROOKETARROW

Offline Jeremy

  • Trad Bowhunter
  • **
  • Posts: 3242
Re: tempering a bow
« Reply #5 on: February 12, 2009, 08:07:00 AM »
This is a very common misconception.

Normal antifreeze contains ethylene glycol, which is poisonous.  RV antifreeze contains propylene glycol (not poisonous).  Neither stabilizes wood well, and using ethylene glycol can be very dangerous depending on what the intended use is.

Green wood is stabilized by soaking it in polyethylene glycol (PEG).  This displaces the water in the wood cells and prevents drying cracks as the wood dries out.  That's it.

You can buy PEG 1000 at some of the bigger woodworking supply places, but I cant see a use for it in bow making.
Great for wood turners though if you want a piece that will always feel waxy
>>>-TGMM Family Of The Bow-->
CT CE/FS Chief Instructor
"Death is not the greatest loss in life.  The greatest loss is what dies inside us while we live." - Norman Cousins

Offline razorback

  • Trad Bowhunter
  • **
  • Posts: 2166
Re: tempering a bow
« Reply #6 on: February 12, 2009, 08:12:00 AM »
Thats the stuff!
Thanks Jeremy.
It is also very expensive if I remember right.
Keep the wind in your face and the sun at your back.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©