Author Topic: question about smooth on  (Read 804 times)

Offline eman614

  • Trad Bowhunter
  • **
  • Posts: 504
question about smooth on
« on: March 03, 2009, 09:45:00 PM »
how long do i need to leave a glued up bow in the oven for? i am using smooth on, and the oven will be at 170 degrees or so.

Offline talkingcabbage

  • Trad Bowhunter
  • **
  • Posts: 791
Re: question about smooth on
« Reply #1 on: March 03, 2009, 10:10:00 PM »
Four to five hours should be plenty.  When you turn the oven off, let everything cool down before you remove it from the oven.  I don't know if it makes a huge difference or not, but I prefer a slow cool down versus taking it out right away and cooling too quickly.
Joe

"If your work speaks for itself, don't interrupt."

One of two things will happen; it'll either work or it won't.

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: question about smooth on
« Reply #2 on: March 03, 2009, 10:22:00 PM »
Yep,same as Joe!
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Offline rkmnt2

  • Trad Bowhunter
  • **
  • Posts: 164
Re: question about smooth on
« Reply #3 on: March 04, 2009, 12:30:00 PM »
I believe the can says if you mix 2A:1B that it withstands temps better. Do you need to cook at all if you do this?

Offline LarsonArchery

  • Trad Bowhunter
  • **
  • Posts: 9
Re: question about smooth on
« Reply #4 on: May 27, 2009, 04:10:00 PM »
You do not have to heat Smooth on but I have found it works better and is a much faster curing time. if you dont heat it your going to need to have at least a 70 degree temperature and cure it for over 24 hours at a minimum in my experience. If you do use an oven I set mine on a timer and always glue up at the end of the day so that when the timer goes off after at least 4 hours by the next day it is cooled off enough to be a slow cool down and still not slow me up. I have multiple ovens and doing it this way curing time is never an issue for me

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©