« previous next »
Pages: [1]   Go Down

Author Topic: Titebond  (Read 592 times)

Offline ks_jon

  • Trad Bowhunter
  • **
  • Posts: 89
Titebond
« on: March 17, 2009, 09:10:00 PM »
Do I want smooth surfaces or do I want to rough both sides up when glueing with titebond?
Logged

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Titebond
« Reply #1 on: March 17, 2009, 09:13:00 PM »
Smooth, clean, well mated surfaces.
Logged
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Glenn Newell

  • Trad Bowhunter
  • **
  • Posts: 276
Re: Titebond
« Reply #2 on: March 24, 2009, 10:12:00 PM »
Jon, I would be roughing both surfaces up with 40 grit sandpaper or scrape with a toothing plane blade before glueing. If both surfaces are planed you wont have a lot of joy with them holding together...Glenn...
Logged

Offline Dano

  • Trad Bowhunter
  • **
  • Posts: 2660
Re: Titebond
« Reply #3 on: March 26, 2009, 04:02:00 PM »
I have done glue-ups both ways, and prefer the smooth,clean,well mated surfaces that Pat suggested. You get a much cleaner glue joint IMO.
Logged
"If the women don't find you handsome, they should at least find you handy" Red Green

Offline Glenn Newell

  • Trad Bowhunter
  • **
  • Posts: 276
Re: Titebond
« Reply #4 on: March 26, 2009, 04:31:00 PM »
Yes you do need to prepare both surfaces to be flat and matched to each other for a perfect fit but they need to be prepared for glueing. The laminations you buy from Binghams are sanded with 80 grit sandaper so the glue will adhere properly. Have a look at action wood and you can clearly see the tool marks where the surfaces were prepared for glueing. Even though the surfaces are flat they are not smooth, you are just asking for trouble...Glenn...
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©