« previous next »
Pages: [1]   Go Down

Author Topic: BBO  (Read 628 times)

Offline bigcountry

  • Trad Bowhunter
  • **
  • Posts: 1027
BBO
« on: April 15, 2009, 11:23:00 AM »
Ok, I have a roughed out blank from Mr. McGuire.  I am considering backing with boo.  

The blanks is pretty straight, not snakey.  Its 2" at the fades now and full 2" all the way to the tips.  

Would all I have to do is sand it or plane it, to make it flat and glue on the boo?  Or is this a waste of a good blank with a sound back and I should just get a core off someone where the back doesn't have to be followed?
Logged

Offline ranger 3

  • Trad Bowhunter
  • **
  • Posts: 2147
Re: BBO
« Reply #1 on: April 15, 2009, 03:37:00 PM »
If it is down to one ring on the back why put boo on it?
Logged
Black widow PLX 48@28
Black widow PSRX 48@28

Offline dave_570

  • Trad Bowhunter
  • **
  • Posts: 46
Re: BBO
« Reply #2 on: April 15, 2009, 03:50:00 PM »
Why Not ??
Logged

Offline bigcountry

  • Trad Bowhunter
  • **
  • Posts: 1027
Re: BBO
« Reply #3 on: April 15, 2009, 03:59:00 PM »
Quote
Originally posted by ranger 3:
If it is down to one ring on the back why put boo on it?
Thought it would be cool to build a BBO.  I have built a selfbow.  But you may be right.  Might make sense just to buy a piece of Osage where the rings are violated.
Logged

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: BBO
« Reply #4 on: April 16, 2009, 12:38:00 AM »
IMO, it is a shame to use a good stave for a backed bow. If you want to build a backed bow get a slat or board.
  You can buy a full stave from Mike, saw the belly stave off of it and back that with bamboo. Then take the top half and make a self bow from it.
Logged
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline bigcountry

  • Trad Bowhunter
  • **
  • Posts: 1027
Re: BBO
« Reply #5 on: April 16, 2009, 10:56:00 AM »
Quote
Originally posted by Pat B:
IMO, it is a shame to use a good stave for a backed bow. If you want to build a backed bow get a slat or board.
  You can buy a full stave from Mike, saw the belly stave off of it and back that with bamboo. Then take the top half and make a self bow from it.
More I think about it, I think your right.  This blank is dead straight.  Don't see too many of these.
Logged

Offline Bear

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 876
Re: BBO
« Reply #6 on: April 16, 2009, 03:52:00 PM »
Also, a chased ring is probably the last thing that would make a good glue line. You need a nice dimensional slat for that.

Skins and hide are different. But on Mike's stuff you won't even need that... unless you just like it.
Logged
Twin Oaks Bowhunters
PBS Associate Member
Traditional Bowhunters of Tennessee

"just remember, you can't put the wood back on"

Offline ishoot4thrills

  • Trad Bowhunter
  • **
  • Posts: 3445
Re: BBO
« Reply #7 on: April 16, 2009, 04:00:00 PM »
Once again, very sound advice from ole Pat B. Two bows from one stave, with one of them being Bamboo backed. Brilliant idea!
Logged
58" JK Traditions Kanati Longbow
Ten Strand D10 String
Kanati Bow Quiver
35/55 Gold Tip Pink Nugents @ 30"
3 X 5" Feathers
19.9% FOC
49# @ 26.75"
165 FPS @ 10.4 GPP (510 gr. hunting arrow)
171 FPS @ 9.7 GPP (475 gr. 3D arrow)
3 Fingers Under

Offline bigcountry

  • Trad Bowhunter
  • **
  • Posts: 1027
Re: BBO
« Reply #8 on: April 16, 2009, 04:47:00 PM »
Quote
Originally posted by Bear:
Also, a chased ring is probably the last thing that would make a good glue line. You need a nice dimensional slat for that.

Skins and hide are different. But on Mike's stuff you won't even need that... unless you just like it.
No, if i did it, I would use a planer to smooth it down flat.  The boo is pretty flexible.
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©