« previous next »
Pages: [1]   Go Down

Author Topic: Glueing Problems- need suggestions  (Read 632 times)

Offline gables

  • Trad Bowhunter
  • **
  • Posts: 388
Glueing Problems- need suggestions
« on: June 10, 2009, 12:25:00 PM »
I have been building bows like the Dryad guys with a center "power" i-beam riser. When I glue up the bow I also glue up my handle block laminations- all with smooth on in an oven. My glue up problems occur when I try to glue this handle block to the belly of my bow blank. I am looking for a solution that sets faster than smooth on curing at room temperature but will be stronger than a 5 minute epoxy. I am gluing ipe sanded with 50 grit and washing it very well with acetone but 5 minute epoxy is delaminating.
Logged
"Art is thoughtful workmanship." W.R. Lethaby

Offline Moen

  • Trad Bowhunter
  • **
  • Posts: 136
Re: Glueing Problems- need suggestions
« Reply #1 on: June 10, 2009, 01:30:00 PM »
Take a piece, and try without acetone. But I think 5 min epoxy is not good for this use. And, one more thing with acetone, i have seen it bring more oil to the surface. Especially on Ipe.

-Moen
Logged
Never believe that you are worthless .... you can always be used as a bad example!

Offline Walt Francis

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 3106
Re: Glueing Problems- need suggestions
« Reply #2 on: June 10, 2009, 03:45:00 PM »
Use Urac 185
Logged
The broadhead used, regardless of how sharp, is nowhere as important as being able to place it in the correct spot.

Walt Francis

Regular Member of the Professional Bowhunters Society

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Glueing Problems- need suggestions
« Reply #3 on: June 11, 2009, 12:16:00 AM »
I agree with Walt...wood to wood; Urac 185!!!
Logged
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline snapper1d

  • Trad Bowhunter
  • **
  • Posts: 226
Re: Glueing Problems- need suggestions
« Reply #4 on: June 11, 2009, 03:16:00 PM »
Moen is right about the oils.
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©