« previous next »
Pages: [1]   Go Down

Author Topic: Nailing Down a String Length  (Read 430 times)

Offline MichHunter

  • Trad Bowhunter
  • **
  • Posts: 12
Nailing Down a String Length
« on: August 17, 2009, 10:41:00 PM »
In general what length of string can you expect to be contacting a recurve limb past the limb groove in the limb.  This is when the bow is properly tuned.  I am twisting a string on my bows and trying to record the ideal string length so that I can order strings.
Logged

Offline Dano

  • Trad Bowhunter
  • **
  • Posts: 2660
Re: Nailing Down a String Length
« Reply #1 on: August 17, 2009, 11:07:00 PM »
Normally a recurve string is 4" shorter than the tip to tip measurement, measured on the belly over the curves tip to tip. Longbows 3" shorter.
Logged
"If the women don't find you handsome, they should at least find you handy" Red Green

Offline Jeremy

  • Trad Bowhunter
  • **
  • Posts: 3242
Re: Nailing Down a String Length
« Reply #2 on: August 18, 2009, 08:16:00 AM »
Depends on how much of the limb is a working recurve and how long of a groove the bowyer made.  I've had bows where there was just barely a hint of a groove and others where the groove extended well past where the string lifts off the bwo at brace.
Logged
>>>-TGMM Family Of The Bow-->
CT CE/FS Chief Instructor
"Death is not the greatest loss in life.  The greatest loss is what dies inside us while we live." - Norman Cousins

Online frank bullitt

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 2417
Re: Nailing Down a String Length
« Reply #3 on: August 18, 2009, 12:18:00 PM »
Dale what type or make bow? Did you make it? The info will help, and what Dano and jeremy, says also.
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©