Author Topic: Tru Oil coats...?  (Read 949 times)

Offline Paul/KS

  • Trad Bowhunter
  • **
  • Posts: 1487
Tru Oil coats...?
« on: September 17, 2009, 03:59:00 PM »
I'm finishing up an osage selfbow and using Tru Oil for the first time. How many coats should I put on?
I usually use tung oil and rub in at least 6-8 coats but this Tru Oil seems thicker and the first coat looked pretty good. Seems like good stuff...

Offline formerbutcher

  • Trad Bowhunter
  • **
  • Posts: 398
Re: Tru Oil coats...?
« Reply #1 on: September 17, 2009, 04:10:00 PM »
I usally go with about 6 thin coats. 0000 steel wool in between coats.
It's a great day to be alive !!

Offline Dano

  • Trad Bowhunter
  • **
  • Posts: 2660
Re: Tru Oil coats...?
« Reply #2 on: September 17, 2009, 05:13:00 PM »
I put on about six coats too, the first two get sanded with 320 grit paper, steel wool between coats and I finish up with two coats of Defthane satin spray.
"If the women don't find you handsome, they should at least find you handy" Red Green

Offline Paul/KS

  • Trad Bowhunter
  • **
  • Posts: 1487
Re: Tru Oil coats...?
« Reply #3 on: September 17, 2009, 05:21:00 PM »
Thanks Dano,
6 seems to be the magic number then...Thanks guys.

I'll buff with 4-0 steel wool between coats same as with tung oil. This stuff seems to dry faster after application so I'll get a coat on tonight after work and then one on tomorrow before work...etc.

"Shift work..."   :rolleyes:

Offline TheFatboy

  • Trad Bowhunter
  • **
  • Posts: 649
Re: Tru Oil coats...?
« Reply #4 on: September 17, 2009, 05:22:00 PM »
Yeah, don't forget that Tru-Oil dries extremely fast. Atleast it did so for me. So ya gotta be quick!
The whole problem with the world is that fools and fanatics are always so certain of themselves, but wiser people so full of doubts.

Offline Dano

  • Trad Bowhunter
  • **
  • Posts: 2660
Re: Tru Oil coats...?
« Reply #5 on: September 17, 2009, 05:29:00 PM »
Your welcome Paul, like Fatboy said it dries fast, you gotta keep a wet edge.
"If the women don't find you handsome, they should at least find you handy" Red Green

Offline scrub-buster

  • Trad Bowhunter
  • **
  • Posts: 1395
Re: Tru Oil coats...?
« Reply #6 on: September 17, 2009, 07:34:00 PM »
What is the best way to put it on with?  I just bought my first bottle of Tru-oil.
AKA Osage Outlaw

Offline Dano

  • Trad Bowhunter
  • **
  • Posts: 2660
Re: Tru Oil coats...?
« Reply #7 on: September 17, 2009, 07:37:00 PM »
Put it on with your index finger, it makes it easier if you pour some in a shallow cup, and then pour whats left over back in the bottle. Put it on thin, the stuff runs easy.
"If the women don't find you handsome, they should at least find you handy" Red Green

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Tru Oil coats...?
« Reply #8 on: September 17, 2009, 11:56:00 PM »
I use 4 to 6 coats,  depending on the coverage and like Dano use satin poly over the last coat to cut the shine. Also like Dano I pour it into a shallow container(bottle or jar cap) while applying it but unlike Dano I pour only enough for the job then discard any left overs. I believe once it hits the air it begins curing and I want to keep whats in the bottle fresh. I also store it on it's cap to extent the shelf life.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline BWD

  • Trad Bowhunter
  • **
  • Posts: 1550
Re: Tru Oil coats...?
« Reply #9 on: September 18, 2009, 12:49:00 AM »
If you don't store it up side down, it will eventually develop a crust. When you break the crust, you start to get little crunchies that do not bode well for a smooth finish.
"If I had tried a little harder and practiced a little more, by now I could have been average"...Me

Offline scrub-buster

  • Trad Bowhunter
  • **
  • Posts: 1395
Re: Tru Oil coats...?
« Reply #10 on: September 18, 2009, 06:17:00 AM »
How far does one small bottle go?  How many bows will it do?
AKA Osage Outlaw

Offline gmc

  • Trad Bowhunter
  • **
  • Posts: 3
Re: Tru Oil coats...?
« Reply #11 on: September 19, 2009, 08:01:00 PM »

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Tru Oil coats...?
« Reply #12 on: September 19, 2009, 09:40:00 PM »
You can finish many bows with a small bottle of Tru-Oil. Generally I throw out a bottle before I use it all up because it has begun to get lumpy after a long while.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©