Author Topic: Exercising bow while tillering  (Read 1222 times)

Offline DCM

  • Trad Bowhunter
  • **
  • Posts: 441
Re: Exercising bow while tillering
« Reply #20 on: December 01, 2009, 08:01:00 AM »
Yer up early Art.  Top 'o da mornin' to ya.  Din see yer post when I started.  Looks like we're thinking similarly.

Offline Art B

  • Trad Bowhunter
  • **
  • Posts: 1398
Re: Exercising bow while tillering
« Reply #21 on: December 01, 2009, 10:28:00 AM »
You're correct David, I think we're both drawing the same conclusion from Ron's last statement. Looks like Ol' "Puff" the Magic Dragon has reared it's ugly head once more. Most of us know how frustrating it is to spend all that time getting things just right using the long string only to have our dreams shattered when we go to the short string and magically the outer portion of the limbs just "puff" up. Just heartbreaking!

Understanding how to prevent this is to understand the geometry change from the long to short string that David mentioned. A really long tillering string exercises the inner or near handle portain of the limb. Rest of the limb gets very little if any exercising. So the shorter the tillering string the better. And when you go from the tilllering string to a bow string the string angle totally changes causing the greater strain on the limbs to move from the inner limb to the outer portion of the limb.  

I like to use a plastic ruler as an example. Hold it out in front of you and press one end downwards. You will noticed the greater bend near the hand you're grasping it with. This mimicks the long string. Now take and press it's end inwards. This mimicks a bow string. Here you will notice the greater bend move outwards.

ART

Offline sssnap

  • Trad Bowhunter
  • **
  • Posts: 27
Re: Exercising bow while tillering
« Reply #22 on: December 01, 2009, 12:35:00 PM »
Yes both hinges were in the outside 1/3 of the limbs.
Thanks guys, I think you hit the nail on the head.
Ron Weaver

Offline Roy Steele

  • Trad Bowhunter
  • **
  • Posts: 1087
Re: Exercising bow while tillering
« Reply #23 on: December 01, 2009, 09:10:00 PM »
When I start tillering I stay 5 pounds short of the weight I want.As I get closer to the draw lenth I want,As get closer to my intended draw lenth.I bring the weight down to 3 then 2 and 1 pound.To I reach the draw leanth I want.Pulling it on my tillering tree 15 or so times each time I move closer to draw lenth and weight I want.
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
 20 YEARS LEARNING 20 YEARS DOING  20 YEARS TEACHING
  CROOKETARROW

Offline Roy Steele

  • Trad Bowhunter
  • **
  • Posts: 1087
Re: Exercising bow while tillering
« Reply #24 on: December 01, 2009, 09:15:00 PM »
Wood is wood but this way you never over stress you limbs.And your bows will have less set and string follow.
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
 20 YEARS LEARNING 20 YEARS DOING  20 YEARS TEACHING
  CROOKETARROW

Offline George Tsoukalas

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2922
Re: Exercising bow while tillering
« Reply #25 on: December 01, 2009, 11:40:00 PM »
Ron, hinges result from uneven wood removal. When tillering try to take off wood in long strokes. Go a little beyond the intended area. Whenever possible I remove wood from the entire length of the limb one end to the other.  Jawge

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©