Author Topic: Tillering a Tri-Lam  (Read 637 times)

Offline Spot60

  • Trad Bowhunter
  • **
  • Posts: 7
Tillering a Tri-Lam
« on: June 05, 2010, 03:10:00 PM »
Hey Bowyer's,

  I just pulled a Bamboo Osage longbow off the form and decided I want to make a Tri-Lam out of it. I have a 1/8" piece of Osage sitting around and that is going to be the final piece I glue onto the belly.
The question I have is;
  If I want to make a 50-55# bow out of this, what should I tiller the bow to before I place that 1/8" piece on it?
  Any help would be greatly appreciated.

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Tillering a Tri-Lam
« Reply #1 on: June 05, 2010, 04:44:00 PM »
Why are you wanting to make it a tri-lam? You probably won't get any more performance from it and you will put more work into it.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Spot60

  • Trad Bowhunter
  • **
  • Posts: 7
Re: Tillering a Tri-Lam
« Reply #2 on: June 05, 2010, 04:59:00 PM »
I have decided to give this one to a friend, and I think they look really nice with the belly running up into the handle. Also I haven't made one before..

Offline tradbower

  • Trad Bowhunter
  • **
  • Posts: 640
Re: Tillering a Tri-Lam
« Reply #3 on: June 05, 2010, 05:17:00 PM »
What is the thickness of belly lam now? When Iam making a boo backed bow I usually start with 7/16 and taper to 1/4 out to tips.
"Never to old to learn something new"

Offline Spot60

  • Trad Bowhunter
  • **
  • Posts: 7
Re: Tillering a Tri-Lam
« Reply #4 on: June 05, 2010, 06:59:00 PM »
I ripped a 1/8" off of a 7/16" board. It's around 1/2" tapered down to just above 1/8" @ the tips.

Offline tradbower

  • Trad Bowhunter
  • **
  • Posts: 640
Re: Tillering a Tri-Lam
« Reply #5 on: June 06, 2010, 08:46:00 AM »
I think it should come in close to the weight your shooting for. What is the width 1 1/2" or
1 3/8" ?
"Never to old to learn something new"

Offline Spot60

  • Trad Bowhunter
  • **
  • Posts: 7
Re: Tillering a Tri-Lam
« Reply #6 on: June 06, 2010, 01:31:00 PM »
The width is is a touch under 1 3/8th's.
Maybe I should just get the limbs bending evenly to 5 inches or so then glue that other lam on and go for it. I don't want to get into a corner though and  find myself running out of belly, I guess I would have to go for a narrower limb if I see that developing...
This should be fun

Offline Osagetree

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3512
Re: Tillering a Tri-Lam
« Reply #7 on: June 06, 2010, 09:13:00 PM »
Your thought brings back memories of this bow. The hickory and walnut were glued up parallel, then both were taperred on a belt sander. The osage belly was glued on when it all went in the fire hose form. Once dried I tillered it out from both belly and back so not to loose the osage belly. The sasafras accents for the handle overlay, tips and fiddle back stain on the hickory backing were added later. Still shoot'n it!

 
 
 
>>--TGMM--> Family of the Bow

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Tillering a Tri-Lam
« Reply #8 on: June 06, 2010, 11:41:00 PM »
Cool bow, Joe.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline 003sim

  • Trad Bowhunter
  • **
  • Posts: 22
Re: Tillering a Tri-Lam
« Reply #9 on: June 07, 2010, 01:04:00 PM »
That bow is really sharp, I really like how that osage looks on the belly of it.
Spot60- You have any photos of what you are making up?

Offline Spot60

  • Trad Bowhunter
  • **
  • Posts: 7
Re: Tillering a Tri-Lam
« Reply #10 on: June 07, 2010, 07:43:00 PM »
Very Nice, When you placed the osage on the bow, How thick was your Osage belly lam and how much did you gain in wieght?  
003, I don't have any pictures, maybe I can wrangle my daughters camera away from her and take some.

Offline Spot60

  • Trad Bowhunter
  • **
  • Posts: 7
Re: Tillering a Tri-Lam
« Reply #11 on: June 08, 2010, 01:07:00 AM »
Ok.Grrrrrr. Just snapped it.

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©