« previous next »
Pages: [1]   Go Down

Author Topic: Tips on installing riser inserts  (Read 391 times)

Offline imskippy

  • Trad Bowhunter
  • **
  • Posts: 805
Tips on installing riser inserts
« on: July 12, 2010, 05:47:00 PM »
I have a kodiak hunter I just picked up for bowfishing and it has 2 screw holes from a sight. I would like to drill and put inserts in to my AMS reel. Any special instructions or just drill em square and epoxy in? Thanks for your time. Skippy
Logged
Zona Custom T/D #1
Zona Custom R/D L/B #1

Offline Dmaxshawn

  • Trad Bowhunter
  • **
  • Posts: 1708
Re: Tips on installing riser inserts
« Reply #1 on: July 12, 2010, 06:55:00 PM »
Use a bottom tap to thread it and epoxy.

Shawn
Logged

Online jess stuart

  • Trad Bowhunter
  • **
  • Posts: 1722
Re: Tips on installing riser inserts
« Reply #2 on: July 12, 2010, 07:33:00 PM »
I usually put a bit of masking tape over the bottom of the insert, before I thread it in, keeps the epoxy out of the insert. Especially  if you use to much.  Guess how I know.
Logged

Offline recurvericky

  • Trad Bowhunter
  • **
  • Posts: 657
Re: Tips on installing riser inserts
« Reply #3 on: July 12, 2010, 10:40:00 PM »
What is the best way to remove a damaged insert?
Logged
Recurvericky
Richmond, Ks

Traditionalist have more fun!

Offline Mike Most

  • Trad Bowhunter
  • **
  • Posts: 927
Re: Tips on installing riser inserts
« Reply #4 on: July 13, 2010, 08:15:00 AM »
I am with Jess here, (learned a new tip) Thanks for being part of this site, masking tape would do it. I remember having to clean out those threads (what a deal)

Mike  :thumbsup:
Logged
"It Shall be Life" (Ten Bears to Josie Wales)
------------------                Michael Most-Adkins Texas
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©