Author Topic: Black Locust  (Read 397 times)

Offline Lee Lobbestael

  • Trad Bowhunter
  • **
  • Posts: 489
Black Locust
« on: July 16, 2010, 03:01:00 PM »
Hey guys! Any body here ever made a self bow with black locust? Anything I should know about it before I start?

Offline Dave Bowers

  • Trad Bowhunter
  • **
  • Posts: 1391
Re: Black Locust
« Reply #1 on: July 16, 2010, 03:09:00 PM »
I personally haven't, but I have seen several bow made from black locust.

Good luck to you!

Offline Osagetree

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3512
Re: Black Locust
« Reply #2 on: July 16, 2010, 04:17:00 PM »
It's a good wood for selfbows. You'll find large growth rings that are easy to follow. I'd go 1 1/2" to 1 3/4" wide at the fades to about mid limb and then tapper to somewhere around 1/2" tips. Tillering is crital as black locust will fret fairly easily.

Here's one I did some years back,,, black locust and blacksnake skin with rivercane arrows.
 
 
 
 
>>--TGMM--> Family of the Bow

Offline Dan Landis

  • Trad Bowhunter
  • **
  • Posts: 1145
Re: Black Locust
« Reply #3 on: July 17, 2010, 07:11:00 PM »
I made one once from a BL sapling about 1-1/4" dia.  It is 65"  ntn and pulls 60# at 28" and shoots pretty good.  This was actually my first shooter, probably would have taken less set if I had more experience at tillering.  I've been looking for a good BL stave to cut so I can make one from a stave.  Keep us posted of your progress.  Dan

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15006
Re: Black Locust
« Reply #4 on: July 17, 2010, 11:32:00 PM »
I cut my bow building teeth on black locust. I could buy locust fence rails for $5 each. I screwed up lots of good locust. My problem not the woods.
  George Tsoukalas loves locust and makes great bows with it. Check out his website.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Lee Lobbestael

  • Trad Bowhunter
  • **
  • Posts: 489
Re: Black Locust
« Reply #5 on: July 17, 2010, 11:55:00 PM »
Thanks guys!Thats a beautiful bow osage! Does heat treating the belly work on bl to help eliminate fretting?

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15006
Re: Black Locust
« Reply #6 on: July 18, 2010, 01:49:00 PM »
I would think that locust would fair well with heat treating the belly. It sure would help the compression.
  I have heard that locust is the strongest wood in compression strength of all the NA hardwoods. It is brittle and that is where the fretting comes in.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Pennsyltuckey pete

  • Trad Bowhunter
  • **
  • Posts: 301
Re: Black Locust
« Reply #7 on: July 21, 2010, 06:53:00 PM »
My first bows were Black Locust.  It is nice to work with and will make a nice bow.  Just beware of the splinters. They fester!
Love one woman, Many Bows

Offline JustinNC

  • Trad Bowhunter
  • **
  • Posts: 82
Re: Black Locust
« Reply #8 on: July 21, 2010, 10:17:00 PM »
Getting ready to. Stumbled on a black locust blown over, still intact from last week's tornado. Fellow said I could have it all. Going to cut what I can for staves and the rest for fire wood. Will likely be my first bow other than maybe a couple board bows (until I get one that holds together). Would start with hickory, but I'll take what the good Lord gives me.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©