Author Topic: Verticle Bamboo Flooring  (Read 623 times)

Offline JamesV

  • Trad Bowhunter
  • **
  • Posts: 2027
Verticle Bamboo Flooring
« on: December 07, 2010, 03:17:00 PM »
I was told this was the same material used in the FastFlex Bamboo cores used for bows. How many of you use it and where can it be bought as flooring? I remember someone saying it comes in 6' lenths and 5/8 thick boards.
Proud supporter of Catch a Dream Foundation
-----------------------------------
When you are having a bad day always remember: Everyone suffers at their own level.

Online jess stuart

  • Trad Bowhunter
  • **
  • Posts: 1722
Re: Verticle Bamboo Flooring
« Reply #1 on: December 07, 2010, 03:55:00 PM »
I have bought a couple of boxes from Lumber Liquidators, 5/8 thick and a little over three feet long.  I use it for lams in glass bows.

Offline Canadabowyer

  • Trad Bowhunter
  • **
  • Posts: 581
Re: Verticle Bamboo Flooring
« Reply #2 on: December 07, 2010, 11:13:00 PM »
Verticle stair risers 7 1/2" x 3/4"x 72". $28.50 each from  www.nwbamboo.com.  Good stuff.  Bob
"non illegitimus carborundum est"

Offline fujimo

  • Trad Bowhunter
  • **
  • Posts: 3619
Re: Verticle Bamboo Flooring
« Reply #3 on: December 07, 2010, 11:22:00 PM »
could you back it with hickory or "outer round" bamboo, and tiller and make a servicable bow without glass??
wayne

Offline JamesV

  • Trad Bowhunter
  • **
  • Posts: 2027
Re: Verticle Bamboo Flooring
« Reply #4 on: December 09, 2010, 11:02:00 AM »
Wayne...........

I have built a lot of backed bows like you described, makes a nice bow. I have only used the action-boo between glass lams. Tried a piece of action-boo to back a bow and it exploded, don't think it is strong enough to be used for backing.
Proud supporter of Catch a Dream Foundation
-----------------------------------
When you are having a bad day always remember: Everyone suffers at their own level.

Offline Cuban Missile

  • Trad Bowhunter
  • **
  • Posts: 332
Re: Verticle Bamboo Flooring
« Reply #5 on: December 09, 2010, 11:23:00 AM »
I think fujimo wants to know if you can use the flooring for the belly, and back it with something else (not glass) like raw boo.  I actually was wondering the same thing
Javier

Offline soopernate

  • Trad Bowhunter
  • **
  • Posts: 553
Re: Verticle Bamboo Flooring
« Reply #6 on: December 09, 2010, 12:58:00 PM »
There was a guy on the stickbow site years ago who did exactly that.  He used vertical grain flooring for the belly, bamboo slats for the back.  He induced six or seven inches of reflex at glue up because bamboo took some set but when he was done tillering it was a real thumper of a bow.
I humbly follow in the learned footsteps of those who precede me.

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Verticle Bamboo Flooring
« Reply #7 on: December 09, 2010, 01:46:00 PM »
I have made a few hickory backed boo flooring bows. They worked OK but just didn't have the zip I expected. I have seen others that were very nice, good shooting bows.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Jeremy

  • Trad Bowhunter
  • **
  • Posts: 3242
Re: Verticle Bamboo Flooring
« Reply #8 on: December 09, 2010, 03:27:00 PM »


Here's r/d all boo bow.  The belly is vertical boo flooring and the back is raw boo.

The compression strength is below even red oak, so expect set.  If you plan for it though, you can end up with a nice shooting bow.
>>>-TGMM Family Of The Bow-->
CT CE/FS Chief Instructor
"Death is not the greatest loss in life.  The greatest loss is what dies inside us while we live." - Norman Cousins

Offline hova

  • Trad Bowhunter
  • **
  • Posts: 1307
Re: Verticle Bamboo Flooring
« Reply #9 on: December 10, 2010, 03:26:00 PM »
wonder what would happen if you did an elb with flooring for the belly , and raw for the back. toast the belly to keep it a little stiff , or even toast the whole thing before glue up...


-hov
ain't got no gas in it...mmmhmmm...

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Verticle Bamboo Flooring
« Reply #10 on: December 10, 2010, 03:30:00 PM »
You can but carbonized boo flooring. It was heated to cause the color to darken.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline hova

  • Trad Bowhunter
  • **
  • Posts: 1307
Re: Verticle Bamboo Flooring
« Reply #11 on: December 10, 2010, 05:24:00 PM »
ive wondered how my cutting board had some light tan and some darker strips...

dont forget , there are lots and lots of species of boo. some can be almost black naturally.

-hov
ain't got no gas in it...mmmhmmm...

Offline Dick in Seattle

  • Trad Bowhunter
  • **
  • Posts: 1673
Re: Verticle Bamboo Flooring
« Reply #12 on: December 10, 2010, 08:24:00 PM »
I buy it by the box from an outfit called "Great Floors".   I think they're just Northwest.   It comes either 6' or 3'.   Used to get 3 feet and it worked fine, till I started building forward riser bows and liking the idea of one piece lams down the front, so now i get 6'.    I tried making a non-glass reinforced bow with it and found it just didn't have the return snap i expected... took a set whichever direction you pushed it.   Not so at all with glass involved... then it's great.
Dick in Seattle

"It ain't how well the bow you shoot shoots, it's how well you shoot the bow you shoot."

Offline hova

  • Trad Bowhunter
  • **
  • Posts: 1307
Re: Verticle Bamboo Flooring
« Reply #13 on: December 10, 2010, 10:09:00 PM »
that makes me think it would be great as a belly for a HbB ELB .

now throw a kink in the works , had any luck with horizontal flooring?


-hov
ain't got no gas in it...mmmhmmm...

Offline Aznboi3644

  • Trad Bowhunter
  • **
  • Posts: 142
Re: Verticle Bamboo Flooring
« Reply #14 on: December 10, 2010, 11:06:00 PM »
I have some horizontal boo flooring boards from reflooring my friends basement.

The color of the boo seems to be indicative of density.  The lighter strips are soft enough to dent with my nail while the darker strips seem to have more power fibers in them and much denser.

I wouldnt use it for belly material unless the board has all good boo in it.

Offline Jeremy

  • Trad Bowhunter
  • **
  • Posts: 3242
Re: Verticle Bamboo Flooring
« Reply #15 on: December 14, 2010, 08:34:00 AM »
The color of the flooring is just the amount of heat that was applied.  The 'carmelized' flooring is heat treated and the natural is not.  The density of both from the same supplier should be the same.  The working properties are not.

The carmelized flooring takes more set in my hands and a few others who have worked with it - probably on the order of 15% more.  

Though the compression strength is below that of red oak, I haven't been able to get it to fail in compression (frets etc).  When I was playing with different profiles I'd use it b/c of that.  If there's a way to get it to fail, an ELB design would be it!  :)   That rounded belly design focuses the stress on a smaller area.  Treat it like a white wood - make it wide and flat.

I haven't tried the horizontal boo... everyone I've heard of that tried a hunting weight bow ended up with splinters. ymmv
>>>-TGMM Family Of The Bow-->
CT CE/FS Chief Instructor
"Death is not the greatest loss in life.  The greatest loss is what dies inside us while we live." - Norman Cousins

Offline JamesV

  • Trad Bowhunter
  • **
  • Posts: 2027
Re: Verticle Bamboo Flooring
« Reply #16 on: December 14, 2010, 01:19:00 PM »
Altho I have not tried it I have heard that Hosizonal flooring won't work.
Proud supporter of Catch a Dream Foundation
-----------------------------------
When you are having a bad day always remember: Everyone suffers at their own level.

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©