« previous next »
Pages: [1]   Go Down

Author Topic: What glue do you use when making laminated riser blocks?  (Read 706 times)

Offline perry f.

  • Trad Bowhunter
  • **
  • Posts: 436
What glue do you use when making laminated riser blocks?
« on: February 05, 2011, 11:11:00 AM »
Just wondered what glue you all used when you make laminated riser blocks? I have some titebond III, but being new at this, I wasn't sure if I needed something else. Thanks!
Logged

Offline Trux Turning

  • Trad Bowhunter
  • **
  • Posts: 1814
Re: What glue do you use when making laminated riser blocks?
« Reply #1 on: February 05, 2011, 11:20:00 AM »
If it is going to be a glass bow I would use smooth-on
Logged

Offline Mike Most

  • Trad Bowhunter
  • **
  • Posts: 927
Re: What glue do you use when making laminated riser blocks?
« Reply #2 on: February 05, 2011, 12:06:00 PM »
Like Trux says, if its glass EA40 Smooth-On Epoxy, an industry standard.
Logged
"It Shall be Life" (Ten Bears to Josie Wales)
------------------                Michael Most-Adkins Texas

Online Walt Francis

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 3106
Re: What glue do you use when making laminated riser blocks?
« Reply #3 on: February 05, 2011, 12:06:00 PM »
Smooth-on for glass and Urac or Resorcinol (sp) for all wood bows.
Logged
The broadhead used, regardless of how sharp, is nowhere as important as being able to place it in the correct spot.

Walt Francis

Regular Member of the Professional Bowhunters Society

Offline anchorman

  • Trad Bowhunter
  • **
  • Posts: 299
Re: What glue do you use when making laminated riser blocks?
« Reply #4 on: February 06, 2011, 12:58:00 AM »
I don't think I would use titebond on a bow. Like everyone else has said I wouod go with smooth-on or Urac, I have used smooth-on and have had no problems with it.
Logged

Offline JamesV

  • Trad Bowhunter
  • **
  • Posts: 2027
Re: What glue do you use when making laminated riser blocks?
« Reply #5 on: February 06, 2011, 08:17:00 AM »
I used TB111 on a few risers and they all held up so far, but for the little savings it isn't worth the doubt. Smooth-on is your best bet for glass bows.

James............
Logged
Proud supporter of Catch a Dream Foundation
-----------------------------------
When you are having a bad day always remember: Everyone suffers at their own level.

Offline JD 9116

  • Trad Bowhunter
  • **
  • Posts: 53
Re: What glue do you use when making laminated riser blocks?
« Reply #6 on: February 06, 2011, 10:26:00 AM »
I agree with everyone. I used tite bond III on one of my very first bows to have it blow up. I have used smooth on ever since with NO problems.
Logged

Offline Carpdaddy

  • Trad Bowhunter
  • **
  • Posts: 806
Re: What glue do you use when making laminated riser blocks?
« Reply #7 on: February 07, 2011, 10:40:00 PM »
I have used the Titebond 3 on several risers without an issue. That doesn't mean that I would recommend it or that I will not have problems with those risers in the future. I could only recommended the same epoxy as the others have mentioned above.
Logged
Stumpshooting; Slinging sticks with sticks toward the origin of the sticks.

Offline legends1

  • Tradbowhunter
  • Trad Bowhunter
  • *
  • Posts: 1793
Re: What glue do you use when making laminated riser blocks?
« Reply #8 on: February 07, 2011, 11:44:00 PM »
I like Smooth-on.
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©