Author Topic: First BBI questions  (Read 399 times)

Offline alex b

  • Trad Bowhunter
  • **
  • Posts: 104
First BBI questions
« on: March 06, 2011, 09:15:00 PM »
Just ordered the materials to make a bamboo backed ipe bow. I've made some selfbows but never attempted any sort of backing.

What glue should I use to glue the bamboo and handle?
any tips on getting a good glue line and application?

How should I taper the bamboo with only handtools?
plane?

I am sure I will have more questions as I continue

thanks
alex

Offline Sal

  • Trad Bowhunter
  • **
  • Posts: 277
Re: First BBI questions
« Reply #1 on: March 06, 2011, 09:58:00 PM »
What kind of poundage are you looking for?  With ipe, 1" will suffice for most weights.  I've had good luck with both urac and titebond III, urac is better but more expensive and more complicated.  I've done several by wrapping them with inner tube tires cut into big rubber bands.  That method gives some excellent glue lines.  The handle gets glued separately with clamps.

Offline alex b

  • Trad Bowhunter
  • **
  • Posts: 104
Re: First BBI questions
« Reply #2 on: March 06, 2011, 10:15:00 PM »
I am looking for #50 @28.
How is Titebond III applied?

thanks

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15022
Re: First BBI questions
« Reply #3 on: March 06, 2011, 10:59:00 PM »
I apply it with my finger.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©