« previous next »
Pages: [1]   Go Down

Author Topic: Please check tiller  (Read 435 times)

Offline razorback

  • Trad Bowhunter
  • **
  • Posts: 2166
Please check tiller
« on: July 10, 2011, 10:04:00 PM »
Ok, pease let me know what you think and where yu believe I need to remove wood. having trouble getting the limbs even so i can move to theshort string. Both limbs are even lengthed and am pulling long string from the middle. I am getting about 6" of tip movement but don't want to pull any further until they are even. Do not want to loose too much weight either. Right limb is bending more near the fade and has nearly 1" more of tip movement.

 

 
Logged
Keep the wind in your face and the sun at your back.

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Please check tiller
« Reply #1 on: July 10, 2011, 10:55:00 PM »
It looks like most of your bend is in the first 12" or so out from the fades. Leave that area alone and get all but the last 6" bending some.
Logged
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline KellyG

  • Trad Bowhunter
  • **
  • Posts: 4254
Re: Please check tiller
« Reply #2 on: July 10, 2011, 10:58:00 PM »
Razor back I can only give you the advise that was give me not long ago.
One get it on the shortest string you can.
two use the gizmo
three I would stay away from the fades and work on the mid limb and out they are looking really flat to me from a little before midlimb out. Just my 2cents. I hope the real pro come along and correct me if I am wrong.
Logged

Offline KellyG

  • Trad Bowhunter
  • **
  • Posts: 4254
Re: Please check tiller
« Reply #3 on: July 10, 2011, 11:05:00 PM »
oh see pat was on it already.
Logged

Offline StoneAK

  • Trad Bowhunter
  • **
  • Posts: 432
Re: Please check tiller
« Reply #4 on: July 10, 2011, 11:16:00 PM »
Pat has nailed it on the head.
Logged
"He never promised that the cross would not be heavy and the hill wouldn't be hard to climb"
"I don't want to gain the whole world, and lose my soul"

10 Year Active Army Disabled Vet.

Offline Eric Krewson

  • Trad Bowhunter
  • **
  • Posts: 3126
Re: Please check tiller
« Reply #5 on: July 10, 2011, 11:24:00 PM »
Yep, you need a gizmo.
Logged

Offline razorback

  • Trad Bowhunter
  • **
  • Posts: 2166
Re: Please check tiller
« Reply #6 on: July 11, 2011, 06:38:00 AM »
Eric and kelly, I have the gizmo and am going to do a refresher on the how to thread using it.

Pat, that is what I was thinking, just needed some confirmation.

Thanks for the comments gentlemen.
Logged
Keep the wind in your face and the sun at your back.

Offline Eric Krewson

  • Trad Bowhunter
  • **
  • Posts: 3126
Re: Please check tiller
« Reply #7 on: July 11, 2011, 08:32:00 AM »
Looks to me that your floor tillering should be a little more complete before you go to the long string, lots of non-bending areas in you limbs.

A little more scraping during floor tillering and you should have a pretty even bend in your limbs when you go to the long string.
Logged

Offline razorback

  • Trad Bowhunter
  • **
  • Posts: 2166
Re: Please check tiller
« Reply #8 on: July 11, 2011, 06:02:00 PM »
Got the gizmo working and an hour of scraping this afternoon. She is looking better. Will do some more tonight and hopefully have more pics then.
Thanks again for the input, and the advice on the floor tillering Eric. Already put that to work on another bow I am working on.
Logged
Keep the wind in your face and the sun at your back.

Offline red hill

  • Trad Bowhunter
  • **
  • Posts: 2025
Re: Please check tiller
« Reply #9 on: July 11, 2011, 09:29:00 PM »
Eric, I must not understand the floor tillering concept. When I "floor tiller" I am looking to see that the limbs are bending. I can't tell very well if the entire limb(s) is bending evenly as I floor tiller. Any advice?
Stan
Logged

Offline PEARL DRUMS

  • Trad Bowhunter
  • **
  • Posts: 3457
Re: Please check tiller
« Reply #10 on: July 12, 2011, 06:37:00 AM »
Put the limb along side your leg and lean into it while peering down its length, you can see flat spots easier than you think. I BELIEVE that is what Eric is saying.
Logged

Offline George Tsoukalas

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2922
Re: Please check tiller
« Reply #11 on: July 12, 2011, 08:39:00 AM »
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©