« previous next »
Pages: [1]   Go Down

Author Topic: bow blank prep  (Read 457 times)

Offline Nesbo1482

  • Trad Bowhunter
  • **
  • Posts: 20
bow blank prep
« on: August 18, 2011, 06:37:00 PM »
Okay so I bought a bow blank from Gary Davis.  It has the finish on it from steaming and straightening.  Do I sand it off before floor tillering?  If so, with what grit? and do I also sand the back of the bow as well?

Thank you for your time,
Logged

Offline broketooth

  • Trad Bowhunter
  • **
  • Posts: 1471
Re: bow blank prep
« Reply #1 on: August 18, 2011, 06:58:00 PM »
i would just start the tillering process no sanding needed. when you start scraping you will take the shellac off anyway thats what was used to protect it from the steaming process.
Logged
" you have done well to keep your hair when so many are after it"

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: bow blank prep
« Reply #2 on: August 18, 2011, 07:37:00 PM »
...and leave the shellac on the back to protect it until you are ready to finish the bow.
  You'll probably find that stave is floor tillered already so you should be able to start on the long string to see how it bends.
Logged
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline frank bullitt

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 2428
Re: bow blank prep
« Reply #3 on: August 19, 2011, 04:51:00 PM »
Michael, yes like said, leave it until your finished.

More than likely, that finish is wood glue.

Gary uses it most, and I have had a few of his blanks over the years! Easy to sand off when your ready, too!
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©