Author Topic: Crack on back of my longbow  (Read 500 times)

Offline Llamma1

  • Trad Bowhunter
  • **
  • Posts: 106
Crack on back of my longbow
« on: September 25, 2011, 04:08:00 PM »
I am starting to develop a crack on the back of my hickery longbow. How would I go about fixing it? Thank you for your help.
Now then, get your equipment—your quiver and bow—and go out to the open country to hunt some wild game for me.

Offline Stiks-n-Strings

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 3226
Re: Crack on back of my longbow
« Reply #1 on: September 25, 2011, 04:30:00 PM »
Can you post some pics of the crack in question?

 Is it with the grain or across the grain?
Striker stinger 58" 55# @ 28
any wood bow I pick off the rack.
 2 Cor. 10:4
 TGMM Family of The Bow
 MK, LLC Shareholder
Proud Member of the Twister Twelve

Offline Llamma1

  • Trad Bowhunter
  • **
  • Posts: 106
Re: Crack on back of my longbow
« Reply #2 on: September 25, 2011, 08:20:00 PM »
It's with the grain. But there is a little spot were it is starting to cross the grain. It's very small I don't think it would show up on my camera.
Now then, get your equipment—your quiver and bow—and go out to the open country to hunt some wild game for me.

Offline nlester

  • Trad Bowhunter
  • **
  • Posts: 258
Re: Crack on back of my longbow
« Reply #3 on: September 26, 2011, 09:05:00 AM »
Happened to me last week.  From what I understand, if it doesn't run off the limb, super glue it, sand off the excess and keep shooting.  I don't think its that big of a deal.  I've shot several times since patching mine, so far so good.  Best of luck
Proverbs 1:7 The fear of the LORD is the beginning of knowledge;
   fools despise wisdom and instruction.

Offline Llamma1

  • Trad Bowhunter
  • **
  • Posts: 106
Re: Crack on back of my longbow
« Reply #4 on: September 27, 2011, 07:28:00 AM »
I was thinking super glue. But I figured I would have to use some tight bond or something like that. Thank you for your time.
Now then, get your equipment—your quiver and bow—and go out to the open country to hunt some wild game for me.

Offline Stiks-n-Strings

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 3226
Re: Crack on back of my longbow
« Reply #5 on: September 27, 2011, 11:15:00 AM »
CA glue (super glue) of any kind will work.

 If there is a crack across the grain that's not good. It will only get worse and fail eventually. You could seal the cracks and back with rawhide or linen or something of that nature. The cracks that run with the grain aren't as bad as the cracks that cross the grain.
Striker stinger 58" 55# @ 28
any wood bow I pick off the rack.
 2 Cor. 10:4
 TGMM Family of The Bow
 MK, LLC Shareholder
Proud Member of the Twister Twelve

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©