Author Topic: Curved vs Flat draw knife?  (Read 601 times)

Offline k-hat

  • Trad Bowhunter
  • **
  • Posts: 365
Curved vs Flat draw knife?
« on: November 22, 2011, 09:26:00 AM »
I'm wanting to get my first draw knife, and in a quandary as to which to go for.  Thought i had a curved off of ****, but someone outbid me the last hour while i was sleeping   :banghead:    
Meanwhile, a guy about 4 gallons of gas away has a flat one for $10 (let's see, @ $3/gal . . .).  dont' wanna go thru the trouble of getting it if it's no use.

What are your thoughts and experiences with these?  

Thanks!
Kevin

"he hath bent his bow, and made it ready . . .his arrow shall go forth as the lightning" - Psalm 7:12, Zech. 9:14

Offline Nim-rod

  • Trad Bowhunter
  • **
  • Posts: 243
Re: Curved vs Flat draw knife?
« Reply #1 on: November 22, 2011, 11:07:00 AM »
I've never used a curved one but I love my flat one because I can used it as a flat scraper as I go along.
Proud to be "regressing"

Offline coaster500

  • Trad Bowhunter
  • **
  • Posts: 3628
Re: Curved vs Flat draw knife?
« Reply #2 on: November 22, 2011, 11:09:00 AM »
For me "a beginner" I can create a curved surface with a flat knife but I can't create a flat surface with a curved knife?

I get most of my wood working tools from antique stores. My draw knife cost $12 bucks...

Good luck
The American system of democracy will prevail until that moment when politicians discover that they can bribe the electorate with their own money

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Curved vs Flat draw knife?
« Reply #3 on: November 22, 2011, 11:09:00 AM »
Each has its own plusses and minuses. I perfer a flat blade but that is mostly all I ever used. Curved blades work well with irregular surfaces.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Stiks-n-Strings

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 3226
Re: Curved vs Flat draw knife?
« Reply #4 on: November 22, 2011, 11:19:00 AM »
I think it's just personal preference. I learned how to chase a ring with a curved drawknife and feel I have more control with one over a flat draw knife.

 Just my flavor I reckon.
Striker stinger 58" 55# @ 28
any wood bow I pick off the rack.
 2 Cor. 10:4
 TGMM Family of The Bow
 MK, LLC Shareholder
Proud Member of the Twister Twelve

Offline red hill

  • Trad Bowhunter
  • **
  • Posts: 2025
Re: Curved vs Flat draw knife?
« Reply #5 on: November 22, 2011, 11:59:00 AM »
I use a flat drawknife.  This week I taught my science students to use the drawknife and farrier's rasp to shape a red oak board bow.  The flat dk seemed easy for Junior High students to use.  
I bought a fairly good dk from an antique store like coaster. Only cost about 12-13 bucks.

Offline k-hat

  • Trad Bowhunter
  • **
  • Posts: 365
Re: Curved vs Flat draw knife?
« Reply #6 on: November 22, 2011, 12:01:00 PM »
Thanks guys.  I've been on the lookout for one at antique stores and such, but i may have to make another round before i drive for this one. Mainly wanted to make sure a flat one would not be a waste of time and money.

Thanks again for the input!
Kevin

"he hath bent his bow, and made it ready . . .his arrow shall go forth as the lightning" - Psalm 7:12, Zech. 9:14

Offline PEARL DRUMS

  • Trad Bowhunter
  • **
  • Posts: 3457
Re: Curved vs Flat draw knife?
« Reply #7 on: November 22, 2011, 12:29:00 PM »
Ive only used a straight knife. I personally cant see any reason for another style. It has done all I asked of it.

Offline Osagetree

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3512
Re: Curved vs Flat draw knife?
« Reply #8 on: November 22, 2011, 03:32:00 PM »
Like Kris, I've always used curved.....
>>--TGMM--> Family of the Bow

Offline KellyG

  • Trad Bowhunter
  • **
  • Posts: 4254
Re: Curved vs Flat draw knife?
« Reply #9 on: November 22, 2011, 07:21:00 PM »
I say go and get it before someone else does.

Offline Adam Keiper

  • Trad Bowhunter
  • **
  • Posts: 264
Re: Curved vs Flat draw knife?
« Reply #10 on: November 24, 2011, 06:00:00 PM »
Personal preference.  I like straight blades that are aligned (not offset) with the handles.

If you're looking for a used one, make sure the steel isn't pitted.  Unless you would grind and hone the base completely flat again, the cutting edge will always be full of nicks, no matter how much you sharpen it.  Also, check to make sure the handles are tight.

Offline George Tsoukalas

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2922
Re: Curved vs Flat draw knife?
« Reply #11 on: December 01, 2011, 08:42:00 AM »
I use a straight handled curved blade but that's only because I inherited it from my Dad. Flea markets and old second hand stores are worthy of frequent trips. Those old knives are great. All they need is some steel wool, a file and some oil. Jawge

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©