Author Topic: Snake skin problem  (Read 419 times)

Offline Sharp Shooter

  • Trad Bowhunter
  • **
  • Posts: 361
Snake skin problem
« on: June 22, 2012, 02:06:00 PM »
I tried experimenting with appling snake skins on fiberglass limbs. I used black glass with copperhead skins and they turned out almost black. I'm guessing that the color of the glass greatly effects the finished color on the limb. Is this correct? and suggestions? Tony

Offline PEARL DRUMS

  • Trad Bowhunter
  • **
  • Posts: 3457
Re: Snake skin problem
« Reply #1 on: June 22, 2012, 02:25:00 PM »
You are correct

Offline Sharp Shooter

  • Trad Bowhunter
  • **
  • Posts: 361
Re: Snake skin problem
« Reply #2 on: June 22, 2012, 10:04:00 PM »
Should I use white or brown glass under copperhead. Tony

Offline yaderehey

  • Trad Bowhunter
  • **
  • Posts: 248
Re: Snake skin problem
« Reply #3 on: June 23, 2012, 10:02:00 AM »
Tony,  those copperhead skins are pretty thin and whatever color is underneath really comes through.  Light tan is one of the best colors underneath copperheads, so maple or bamboo under clear glass works really well.  I think copperheads over most brown glass would still come out fairly dark.  If you want to put copperheads over black glass or other dark colored limbs you can spray the limbs with a light coat of cream or tan spray paint before laying down the skins.  Pretty much any cheap rattle can paint will work, but get some with a flat finish and use just enough to get your color on the limb.

Offline Sharp Shooter

  • Trad Bowhunter
  • **
  • Posts: 361
Re: Snake skin problem
« Reply #4 on: June 24, 2012, 11:20:00 AM »
Thanks Clark and Chris, This is new for me and I appreciate all comments. Would maple or light colors be best on rattlers? Tony

Offline yaderehey

  • Trad Bowhunter
  • **
  • Posts: 248
Re: Snake skin problem
« Reply #5 on: June 25, 2012, 01:08:00 AM »
Tony, rattler skins are thicker and their pattern shows up pretty well on any color limb, including black glass.

Offline Roy Steele

  • Trad Bowhunter
  • **
  • Posts: 1087
Re: Snake skin problem
« Reply #6 on: June 27, 2012, 09:42:00 AM »
I waisted a pais of copper heads before I learned to spray painted a thin coat of tan on glass limbs before glueing. I waisted another set my useing white. White dos'nt look very good (natural).  
  Did'nt have internet then and no one to ask.
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
 20 YEARS LEARNING 20 YEARS DOING  20 YEARS TEACHING
  CROOKETARROW

Offline Sharp Shooter

  • Trad Bowhunter
  • **
  • Posts: 361
Re: Snake skin problem
« Reply #7 on: June 29, 2012, 02:12:00 PM »
Here's a sample i did using clear glass and a light colored veneer. Tony
 

Offline yaderehey

  • Trad Bowhunter
  • **
  • Posts: 248
Re: Snake skin problem
« Reply #8 on: June 29, 2012, 09:23:00 PM »
That looks really good Tony!

Offline SEMO_HUNTER

  • Trad Bowhunter
  • **
  • Posts: 2792
Re: Snake skin problem
« Reply #9 on: July 01, 2012, 11:24:00 AM »
That's good info to have cause I've got a pair (3) actually that I'll be putting on a bow soon. It's too dang hot in the garage to build right now, but perfect for skinnin a couple bows.

FWIW- I put water mocassins over black glass and they turned out pretty awesome. Might look for some of those if you have a dark colored bow to skin and mocassins are suprisingly attractive on a bow I think.

This one has black glass underneath and the mocassins came from Snakewood TG member.


 

 

 
~Varitas Vos Liberabit~ John 8:32

Offline Sharp Shooter

  • Trad Bowhunter
  • **
  • Posts: 361
Re: Snake skin problem
« Reply #10 on: July 01, 2012, 12:00:00 PM »
Those look great! I like the looks of mocassin skins. I have a friend in Florida that is trying to get me some. Thanks for the info. Tony

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©