Bingham kit question

[Hill Hunter]

I have received my  62" hybrid long bow kit, I am starting on the press and have a question, I assume Bingham will be closed until Tuesday so maybe someone here can help.
in the video it show putting a tapered lamination under the Formica strip on the press. in my kit I have the Formica strip for the press, the pressure strip (both labeled) and a stack taped together in what looks like the order it would go, black glass top and bottom and 4 wood lamination, one of which is tapered a lot. my question is, does this tapered lam go in the bow, or it that the strip that the video says to glue to the press?

[CardboardDuck]

The DVD and instructions they send are for a regular longbow, that press requires the taper in the press. I have the same kit and the taper goes in the bow. The formica strip is the only thing that goes on the press.

If I remember right the process is glass > parallel > parallel > parallel > riser > taper > glass

[Hill Hunter]

Thank you, that is the order they are in.
spent a couple of weekends so far "fixin to" build a  bow, it seems that is a bigger job than the bow is going to be.

[Werewolf]

ive got kinda the same problem.....but my lams were shipped in order but one taper is up the other down....which is it?

[Werewolf]

oops...ive got a different kit mined the take down......sorry mute question here