R/D Limb template ?

[Big-un08]

To say the least, I ruined two pieces of fiberglass tonight trying to get one built. Is there any other material out there that might work for this?

Thanks in advance, Chris

[bigbob2]

Kennym sells templates for Reflex/ deflex.Just need a pattern bit and a router . Thats if your looking to make a form for R/F.

[Furtaker]

Try clear plexi-glass its a little easier to work with.

[Dallas]

I use 1/16th inch aluminum strip.  Relatively easy to work with and durable.  Assuming you are talking about a limb width template.

[JamesV]

I made my limb profile template out of formica, Most cabinet shops have scrap pieces they will give you or sell for cheap

[Big-un08]

Some good ideas here. I was using .043 clear glass on the first two, and I couldn't keep it from splintering.  

[Crooked Stic]

I make mine with .100 A-boo lam.

[Dan Bonner]

I like  .040 glass. Take a straight edge and a knife and score repeatedly along the desired edge. After a fair amount of work it will break cleanly along the scored line and you can do it very precisely. I screwed up a lot of glass trying to cut and grind it to shape. This way works perfectly for me.

Bonner