« previous next »
Pages: [1]   Go Down

Author Topic: Bloodwood for veneers?  (Read 264 times)

Offline beachbowhunter

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2713
Bloodwood for veneers?
« on: December 06, 2012, 08:00:00 PM »
Guys, I have a nice piece of bloodwood and would like to use it as a veneer. I've seen where people have said it is very stiff and can be oily. Is that true?  Would it be ok for a thin veneer? I will use maple for the lams...
Logged
Ishi was a Californian                   :cool:

Offline legends1

  • Tradbowhunter
  • Trad Bowhunter
  • *
  • Posts: 1793
Re: Bloodwood for veneers?
« Reply #1 on: December 06, 2012, 10:24:00 PM »
I use it all the time in risers mostly 1/8" accents. Not ever used it in a limb but know its been done.
Logged

Offline Troy D. Breeding

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 1073
Re: Bloodwood for veneers?
« Reply #2 on: December 07, 2012, 09:31:00 AM »
Like Michael I've used it alot as accent stripes in risers. No problems to date using it that way. However, I've always considered it too oily of a wood for limbs. Might have a glue problem when bending. JMHO...

Troy
Logged
Troy D. Breeding
 www.WoodGallery295.net

Retirement ain't what it's cracked up to be.

Offline Trumpkin the Dwarf

  • Trad Bowhunter
  • **
  • Posts: 1248
Re: Bloodwood for veneers?
« Reply #3 on: December 07, 2012, 10:25:00 AM »
Having worked with rosewood a bit, I found it to be crumbly and oily. I would guess there could be problems if you did not prepare the wood extremely well before glue up.
Logged
Malachi C.

Black Widow PMA 64" 43@32"

Offline Trad Dad

  • Trad Bowhunter
  • **
  • Posts: 30
Re: Bloodwood for veneers?
« Reply #4 on: December 07, 2012, 01:53:00 PM »
Sam Harper of poorfolkbows.com did one with bloodwood.

 http://poorfolkbows.com/glass3.htm
Logged

Offline beachbowhunter

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2713
Re: Bloodwood for veneers?
« Reply #5 on: December 07, 2012, 02:52:00 PM »
Thanks for the feedback. Is is more oily than cocobolo which is used all the time for veneers?
Logged
Ishi was a Californian                   :cool:

Offline 7 Lakes

  • Trad Bowhunter
  • **
  • Posts: 766
Re: Bloodwood for veneers?
« Reply #6 on: December 08, 2012, 02:11:00 PM »
It will work, not saying it will be good but it'll work.  Get a new roll of sandpaper for the drum, it's sticky, gummy stuff to work with.
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©