Author Topic: trying for a kids bow  (Read 354 times)

Offline robA72

  • Trad Bowhunter
  • **
  • Posts: 67
trying for a kids bow
« on: March 21, 2013, 06:21:00 PM »
Hey guys.
I'm trying to make a board bow for my son. I'm using red oak (I know, I know. It's not the best stuff)and it is 48" ttt. It fades in thickness from 3/4 inch at the center to 1/4 at the tips.
At those dimensions, this thing just wont bend. It would be way to heavy of a draw for a 60lb boy.
So my question is: Any suggestions on what thickness I can aim for? I'm worried the board will fail if I go much thinner.
Thank you all in advance

Offline John Scifres

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 4540
Re: trying for a kids bow
« Reply #1 on: March 21, 2013, 07:51:00 PM »
Kinda depends on width but, thickness will be less than 1/2" for sure, especially at 48".  My adult sized bows start at 5/8" and generally are 1/2" to 5/8" thick.  Some kids bows I have made are closer to 1/4" thick than 1/2".
Take a kid hunting!

TGMM Family of the Bow

Offline razorback

  • Trad Bowhunter
  • **
  • Posts: 2166
Re: trying for a kids bow
« Reply #2 on: March 21, 2013, 08:41:00 PM »
I agree with John. i have made several kids bows from red oak and they end up fairly thin. I would start reducing from the fades out and get an even taper from about 1/2" to the 1/4"tips. See how it is bending then and continue from there. Post some pics if you can.
Keep the wind in your face and the sun at your back.

Offline critman

  • Trad Bowhunter
  • **
  • Posts: 376
Re: trying for a kids bow
« Reply #3 on: March 21, 2013, 09:24:00 PM »
I usually shoot for somewhere around 3/8 at the fades and taper to 1/4 for a low poundage bow. Be careful though, it seems to be harder to get good tiller on those thin limbs. Got a pile of broken bows to prove it!  Red oak is fine for kids bows, I am currently working on my fifth one now.

Offline macbow

  • Trad Bowhunter
  • **
  • Posts: 2870
Re: trying for a kids bow
« Reply #4 on: March 21, 2013, 09:31:00 PM »
I've made a ton of kids bows. Started out with  just 1/4 inch red oak with glue on handles.
48 inches ttt .
1 1/2'inches wide at the center. Leave room for 4 inche handle and 2 inch fades. Use pyramid style tapering width from 1 1/2 to 3/8 tips.
This design pretty much is tillered already. Will give about 15 pounds at 24 inches draw.

I now mostly make bamboo backed kids bows as all the Gkids have grown.
United Bowhunters of Mo
Comptons
PBS
NRA
VET
"A man shares his Buffalo". Ed Pitchkites

Offline robA72

  • Trad Bowhunter
  • **
  • Posts: 67
Re: trying for a kids bow
« Reply #5 on: March 21, 2013, 10:07:00 PM »
Okay. Great stuff.
You guys are the best!
So I'll keep going and get this thing down to a 1/2" at it's thickest point. I will get some pics up soon.
Thank you all very much.
Also, have any of you ever tried to condition a red oak board to take some of the dryness out of the wood? If so, what did you use?

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©