« previous next »
Pages: [1]   Go Down

Author Topic: Sealer for Ipe and Osage  (Read 526 times)

Offline Zradix

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5798
Sealer for Ipe and Osage
« on: April 18, 2013, 02:43:00 PM »
Hey Gang.

I've heard that Ipe and osage are fairly oily woods and are tricky to seal.

I'm a fan of minwax wipe on poly for my arrows.

Would this be a good finish for a bow using these woods?

Thanks
Logged
If some animals are good at hunting and others are suitable for hunting, then the Gods must clearly smile on hunting.~Aristotle

..there's more fun in hunting with the handicap of the bow than there is in hunting with the sureness of the gun.~ F.Bear

Offline PEARL DRUMS

  • Trad Bowhunter
  • **
  • Posts: 3457
Re: Sealer for Ipe and Osage
« Reply #1 on: April 18, 2013, 04:10:00 PM »
Wipe a coat or two of shellac on it. Then seal it with any sealer you chose.
Logged

Offline Zradix

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5798
Re: Sealer for Ipe and Osage
« Reply #2 on: April 18, 2013, 04:18:00 PM »
Shellac eh?
Just some thin stuff?..  1-2# cut or so?

Why shellac if you don't mind telling me..
..dry quick over the oily stuff and gives a base for other finishes?

Thanks!
Logged
If some animals are good at hunting and others are suitable for hunting, then the Gods must clearly smile on hunting.~Aristotle

..there's more fun in hunting with the handicap of the bow than there is in hunting with the sureness of the gun.~ F.Bear

Offline Robertfishes

  • Trad Bowhunter
  • **
  • Posts: 3490
Re: Sealer for Ipe and Osage
« Reply #3 on: April 18, 2013, 09:22:00 PM »
I used Zinsser Bulls Eye Shellac in a spray can  to seal up a Rosewood bow once, I sprayed glass and wood. It worked well and I sprayed Minwax Helmsman Spar urethane over it  
Logged

Offline Igor

  • Trad Bowhunter
  • **
  • Posts: 974
Re: Sealer for Ipe and Osage
« Reply #4 on: April 18, 2013, 09:40:00 PM »
I haven't had any issues with Osage....rosewood on the other hand I've had to use superglue or shellac...


good luck

><>>
Glenn
Logged
Trust in the Lord with all your heart and lean not on your own understanding In all your ways submit to him and he will direct your paths

Offline macbow

  • Trad Bowhunter
  • **
  • Posts: 2870
Re: Sealer for Ipe and Osage
« Reply #5 on: April 18, 2013, 09:42:00 PM »
Exactly as you said.
It drys fast and anything will stick to shellac.
Just about any cut will work. I just keep some granulated shellac and mix a small amount at a time.
Logged
United Bowhunters of Mo
Comptons
PBS
NRA
VET
"A man shares his Buffalo". Ed Pitchkites

Offline Zradix

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5798
Re: Sealer for Ipe and Osage
« Reply #6 on: April 18, 2013, 09:50:00 PM »
Thank you gentlemen.
Logged
If some animals are good at hunting and others are suitable for hunting, then the Gods must clearly smile on hunting.~Aristotle

..there's more fun in hunting with the handicap of the bow than there is in hunting with the sureness of the gun.~ F.Bear

Offline Echatham

  • Trad Bowhunter
  • **
  • Posts: 1316
Re: Sealer for Ipe and Osage
« Reply #7 on: April 20, 2013, 10:34:00 AM »
zradix i used spray shellac and tru oil on my ipe and it worked good
Logged

Offline Zradix

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5798
Re: Sealer for Ipe and Osage
« Reply #8 on: April 20, 2013, 11:55:00 AM »
Sounds like a plan.

Thanks guys!
Logged
If some animals are good at hunting and others are suitable for hunting, then the Gods must clearly smile on hunting.~Aristotle

..there's more fun in hunting with the handicap of the bow than there is in hunting with the sureness of the gun.~ F.Bear
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©