Author Topic: When to flip tips  (Read 327 times)

Offline red hill

  • Trad Bowhunter
  • **
  • Posts: 2025
When to flip tips
« on: May 11, 2013, 06:55:00 PM »
Been dabbling with an Osage self bow off and on for a few months.  Have it to a low brace and started to tiller.  

My question is, when should I flip the tips?  I don't want much curve, just a slight upward recurve to the unstrung profile of the bow.

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20690
Re: When to flip tips
« Reply #1 on: May 11, 2013, 07:57:00 PM »
Flip them now.

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: When to flip tips
« Reply #2 on: May 12, 2013, 10:43:00 AM »
Anytime after floor tiller. The less wood you have the easier it is to bend.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline red hill

  • Trad Bowhunter
  • **
  • Posts: 2025
Re: When to flip tips
« Reply #3 on: May 13, 2013, 02:52:00 PM »
Thank you.

I've noticed on a few posts that splinters sometimes lift when tips are being flipped.  (Although those were being flipped more than I want at this time.) Should I be overly concerned with that possibility?

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: When to flip tips
« Reply #4 on: May 13, 2013, 03:04:00 PM »
I clamp the tip of the bow in the horm and heat it until gravity begins to take it down. This will usually do the job wthout cracking if you aren't flipping them too much. Osage reacts really well to heat.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©