« previous next »
Pages: [1]   Go Down

Author Topic: Grinding lams?  (Read 556 times)

Offline longrifle

  • Trad Bowhunter
  • **
  • Posts: 846
Grinding lams?
« on: July 19, 2013, 12:51:00 PM »
Just wondering what grit paper do you guys use to grind lams with,I have been using 60 grit but,was wondering if I should go coarser?
Logged
The human body is the only machine the harder you work it, the stronger it gets.
"Aim small- Hit small" ( I never think negative)

Offline Sam Harper

  • Trad Bowhunter
  • **
  • Posts: 474
Re: Grinding lams?
« Reply #1 on: July 19, 2013, 01:41:00 PM »
I've used anywhere from 40 to 60 grit.
Logged
There are strange things done in the midnight sun by the men who moil for gold.

Online Magnum in Ms

  • Trad Bowhunter
  • **
  • Posts: 294
Re: Grinding lams?
« Reply #2 on: July 19, 2013, 03:44:00 PM »
60 grit
Logged
Every one is ignorant its just on different subjects

Offline Bowjunkie

  • Trad Bowhunter
  • **
  • Posts: 2324
Re: Grinding lams?
« Reply #3 on: July 19, 2013, 04:02:00 PM »
36 - 40 grit
Logged

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17340
Re: Grinding lams?
« Reply #4 on: July 19, 2013, 07:09:00 PM »
Usually 40, but have been to 50 and 36 before.

36 leaves some lines, and with the belt oscillating, makes swervy lines, so 40 now.
Logged
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Offline jsweka

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3571
Re: Grinding lams?
« Reply #5 on: July 19, 2013, 08:01:00 PM »
If Kenny uses 40, then use 40. His lams are the best   :thumbsup:
Logged
>>>---->TGMM<----<<<<

Offline LC

  • Trad Bowhunter
  • **
  • Posts: 1302
Re: Grinding lams?
« Reply #6 on: July 19, 2013, 08:01:00 PM »
I've always used 36 because that's what I was taught you needed. But it's true it leaves sanding lines that shows up ALOT on certain woods or stains. Sadly I ordered a bulk supply last time I ordered sand paper!
Logged
Most people get rich by making more money than they have needs, me, I just reduced my needs!

Offline Crooked Stic

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6076
Re: Grinding lams?
« Reply #7 on: July 19, 2013, 08:41:00 PM »
I have used 60 grit from the git-go. I have heard some guys use 80 for veneers.
Logged
High on Archery.

Offline bigbob2

  • Trad Bowhunter
  • **
  • Posts: 2160
Re: Grinding lams?
« Reply #8 on: July 19, 2013, 11:56:00 PM »
I only use 40 grit but did experiment with 24 Grit once. Great if you want to reduce thick lams quick but wouldn't use it for final passes
Logged

Offline Troy D. Breeding

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 1073
Re: Grinding lams?
« Reply #9 on: July 20, 2013, 07:30:00 AM »
50 for me
Logged
Troy D. Breeding
 www.WoodGallery295.net

Retirement ain't what it's cracked up to be.

Offline longrifle

  • Trad Bowhunter
  • **
  • Posts: 846
Re: Grinding lams?
« Reply #10 on: July 21, 2013, 06:36:00 PM »
I just wanted to make sure that I wasn't starving the glue joint,I am talking glass bows here and smooth-on.Anyone go back and rough them up with another grit as well.
Logged
The human body is the only machine the harder you work it, the stronger it gets.
"Aim small- Hit small" ( I never think negative)

Offline Bowjunkie

  • Trad Bowhunter
  • **
  • Posts: 2324
Re: Grinding lams?
« Reply #11 on: July 21, 2013, 07:10:00 PM »
There would be no need. If you grind them with a coarse enough paper, when they're done, they're adequately roughed and ready for glue up.
Logged

Offline MoeM

  • Trad Bowhunter
  • **
  • Posts: 491
Re: Grinding lams?
« Reply #12 on: July 21, 2013, 07:25:00 PM »
I bought 2 rolls 14m velcrobacked p80 for my hand-fed DIY drumsander and ist`s not coarse enough for fast grinding; next time I`ll order 60 or even 40 grit...
Logged

Offline JamesV

  • Trad Bowhunter
  • **
  • Posts: 2027
Re: Grinding lams?
« Reply #13 on: July 22, 2013, 02:08:00 PM »
I cut all my lams with a thickness planer.
Logged
Proud supporter of Catch a Dream Foundation
-----------------------------------
When you are having a bad day always remember: Everyone suffers at their own level.
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©