Author Topic: Birchwood sealer&filler  (Read 376 times)

Offline MoeM

  • Trad Bowhunter
  • **
  • Posts: 491
Birchwood sealer&filler
« on: September 08, 2013, 05:58:00 PM »
Hey Gang,
I`ve read so much about the fabulous tru-oil here that I`m going to order some.
I came across the sealer&filler when I was looking for it and I wonder if it`s recommended by you who have experience with it?!
I also wonder if tru-oil will wipe away labeling by paint markers on glass limbs?

Thanks in advance for your priceless knowledge   :)

Offline macbow

  • Trad Bowhunter
  • **
  • Posts: 2870
Re: Birchwood sealer&filler
« Reply #1 on: September 08, 2013, 07:01:00 PM »
I used Tru-oil over acrylic paint with no problem.
Haven't tried it on,any other markers.
United Bowhunters of Mo
Comptons
PBS
NRA
VET
"A man shares his Buffalo". Ed Pitchkites

Offline Eric Krewson

  • Trad Bowhunter
  • **
  • Posts: 3126
Re: Birchwood sealer&filler
« Reply #2 on: September 09, 2013, 09:28:00 AM »
Tru-oil won't wipe off lettering in my experience.

The sealer and filler is for open pore woods like walnut and does just what it says if you put on enough coats.I just sealed a walnut flintlock stock with it, it filled the pores.

The sealer is made to be sanded down after you fill the open grain. It is not a very durable finish and will wear off quickly. I put it on my almost finished flintlock fowler so I could test shoot the gun and not fill the stock pores up with black powder residue. It worked fine for this but the sweat of my hands wore it back down to bare wood. It is a good grain sealer not not a good finish.

Offline MoeM

  • Trad Bowhunter
  • **
  • Posts: 491
Re: Birchwood sealer&filler
« Reply #3 on: September 09, 2013, 09:38:00 AM »
Thanks guys- this combo seems to be perfect for me; i don`t like superglue for filling as it prevents the oil finish from soaking deeply, poping the colours and I was looking for a finish that doesn`t wipe away my labeling and is harder and easier to polish than usual oils...

Offline bigbob2

  • Trad Bowhunter
  • **
  • Posts: 2160
Re: Birchwood sealer&filler
« Reply #4 on: September 09, 2013, 06:26:00 PM »
MoeM I use true oil and while its brilliant for woods, especially after multiple coats  on  the risers,it  is drives me nuts over glass leaving it streaky.

Offline MoeM

  • Trad Bowhunter
  • **
  • Posts: 491
Re: Birchwood sealer&filler
« Reply #5 on: September 10, 2013, 04:27:00 PM »
LMAO so as long as I keep using the cheap Bearpaw glass I won`t even realize any further streaks...

Users currently browsing this topic:

0 Members and 4 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©