Author Topic: Lumber Selection Help  (Read 306 times)

Offline Japes4

  • Trad Bowhunter
  • **
  • Posts: 52
Lumber Selection Help
« on: September 26, 2013, 08:45:00 AM »
Hi all,
Looking to make a wood backed bow (Hickory or Boo I'm thinking but open to suggestions) and need some advise from the experts here on this site for the belly wood. Here is all I have available to me locally:

Red and White Oak, Maple, Mahogany, Cherry, Walnut, Cedar

Teak, Lacewood, Bubinga, Padauk, Zebrawood, Bloodwood, Purpleheart, Wenge, Morado, Canary

 I have made two red oak board bows and looking for something a bit different. Thinking 64" (only a 25" draw),1 1/2-1 3/4 wide, and 3/8 at tips with a slight reflex, and a glue on riser. Looking for 55-60#.  This is my next step before I tackle a tri-lam. Any help on woods that should be good to use would be greatly appreciated.
"...there's more fun in hunting with the handicap of a bow than there is in hunting with the sureness of the gun."

Offline John Scifres

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 4540
Re: Lumber Selection Help
« Reply #1 on: September 26, 2013, 10:59:00 AM »
Make your life easier and order your bamboo and some osage or hickory from a bow wood supplier.
Take a kid hunting!

TGMM Family of the Bow

Offline LittleBen

  • Trad Bowhunter
  • **
  • Posts: 2970
Re: Lumber Selection Help
« Reply #2 on: September 26, 2013, 10:59:00 AM »
In no particular order:

Bamboo nad hickory is probably too strong for red or white oak unless you trap it to maybe 1/2 the width of the limb, but that might be a reasonable approach.

Hard maple is supposed to be pretty decent ... I've only use soft maple and it sucks.

Western red cedar is not really decent bow wood.

Eastern red cedar can work, but only a really nice clean knot free board is likely to make the weight you want, I'g guess. I'd also only back it with something like maple, or rawhide, probably not bamboo. Maybe severly trapped hickory.
Same for walnut.

Wenge is pretty strong and very nice but expensive.
Same for bubinga.

Purpleheart is easy to chrysal so I probably wouldn;t use it, plus they say it's hard as woodpeckers lips and will blunt all your tools.

Someone once told be zebrawood is a decent compression wood. Might consider that one ... and it's not prohibitively expensive.

Teak is not that dense, is oily, difficult to glue, and frankly, ridiculously expensive.

Not familiar with bloodwood, lacewood, paduak, morado or canarywood as bow woods.

Also there are extensive lists of bow wood by species in TBB and online: Google: "bow woods list"

might be worth just buying a nice piece of Ipe. Some lumberyards sell ipe stock ... might want to call around. Also tenbrook (sponsor on here) sells ipe and bamboo ...

Offline takefive

  • Trad Bowhunter
  • **
  • Posts: 1098
Re: Lumber Selection Help
« Reply #3 on: September 26, 2013, 12:14:00 PM »
I agree with John; osage first and then hickory are your best bets for a bamboo or hickory backed bow.  I've tried cherry and walnut for the belly on hickory backed tri-lams and they've both chrysalled.  That is a sinking feeling seeing your time and effort go down the drain.  Pine Hollow sells osage boards and probably hickory as well.
It's hard to make a wooden bow which isn't beautiful, even if it's ugly.
-Tim Baker

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©