Author Topic: Mulberry branch bow  (Read 413 times)

Offline takefive

  • Trad Bowhunter
  • **
  • Posts: 1098
Mulberry branch bow
« on: November 16, 2013, 02:06:00 AM »
I took a cracked branch down from my backyard mulberry tree last summer, split it and have had it drying since then.  Only about 3 feet of it was reasonably straight so I wound up Z splicing the halves.  I knew that in the off chance that it became a bow, it would be a very light one 'cuz there wasn't much wood there to work with.  So I was really happy to hear that my daughter really liked the way it looked when she saw me working on it.  She's 5'2" and petite, so I'm shooting for about 25# at her short draw.  Tiller is pretty even now and I had it bending to 20" on my tree.  I'm going to back it with cherry bark before I finish tillering it.  It's 63 1/2" NTN and 1 1/2" wide at the fades.  The string tracks a bit to one side (that's where the arrow pass is going to be) but I was surprised it was that close considering how crooked the limbs are.  Yeah, I have to find some bigger bow wood or break down and buy a stave one of these days.   :)  

 

 

 

 
It's hard to make a wooden bow which isn't beautiful, even if it's ugly.
-Tim Baker

Offline soy

  • Trad Bowhunter
  • **
  • Posts: 698
Re: Mulberry branch bow
« Reply #1 on: November 16, 2013, 03:13:00 AM »
That is gonna look cool   :saywhat:

Offline KellyG

  • Trad Bowhunter
  • **
  • Posts: 4249
Re: Mulberry branch bow
« Reply #2 on: November 16, 2013, 08:40:00 PM »
Awesome!

Offline Trapper Rob

  • Trad Bowhunter
  • **
  • Posts: 441
Re: Mulberry branch bow
« Reply #3 on: November 16, 2013, 08:52:00 PM »
Looks like your daughter is going to have a sweet bow.

Offline LittleBen

  • Trad Bowhunter
  • **
  • Posts: 2970
Re: Mulberry branch bow
« Reply #4 on: November 17, 2013, 08:31:00 AM »
it's a fairly lightweight bow so frankly it probably wont matter, btu I'd say on a hunting weight bow, you'd probably want to smooth those fade into the limbs a little bit more progressively to prevent hinging right out of the fades.

Offline takefive

  • Trad Bowhunter
  • **
  • Posts: 1098
Re: Mulberry branch bow
« Reply #5 on: November 17, 2013, 03:56:00 PM »
Thanks much guys, this has been a fun bow to work on.  Kinda funny, too, that the most primitive bow I've made is the one that my very modern daughter likes the best.  She really likes the fact that it came from a tree in our yard.  I glued the bark on yesterday and will post a picture after I steel wool it.  The fades do look pretty blocky in the picture Ben, but the transition is actually smoother than it looks.  The handle is only 8" so I made the fades a bit shorter than usual, about 1 3/4".  I think I have enough room to taper them a little more, though.  I'll post a pic of that too, and appreciate your feedback.    :)
It's hard to make a wooden bow which isn't beautiful, even if it's ugly.
-Tim Baker

Offline LittleBen

  • Trad Bowhunter
  • **
  • Posts: 2970
Re: Mulberry branch bow
« Reply #6 on: November 17, 2013, 09:49:00 PM »
Hey if it shoots well, stick with it man. I really like the contrast between the sapwood and heartwood.

Offline takefive

  • Trad Bowhunter
  • **
  • Posts: 1098
Re: Mulberry branch bow
« Reply #7 on: November 17, 2013, 11:08:00 PM »
Well, the bark is about as steel wooled as it's going to get.  Pretty cool stuff.  I like that narrow strip of heartwood, too, Ben.  I'm going to look for a full sized mulberry stave one of these days.

 

 

 
It's hard to make a wooden bow which isn't beautiful, even if it's ugly.
-Tim Baker

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©