Author Topic: Where do you get foam limb core material?  (Read 489 times)

Offline LittleBen

  • Trad Bowhunter
  • **
  • Posts: 2970
Where do you get foam limb core material?
« on: December 06, 2013, 08:36:00 AM »
I'm afraid to even ask, because of how many possible carbon limb questions this might spawn.

I remember a thread a while back and someone posted a picture of a bow, I believe a one piece with a foam core, and IIRC it was not one of the full-time professional guys. Meaning, obviously someone sells this stuff. I can;t imagine bowyers are making it it seems like it wouold be some super high tech, highly controlled process.

Someone help a guy out.

Offline Zradix

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5798
Re: Where do you get foam limb core material?
« Reply #1 on: December 06, 2013, 12:35:00 PM »
Maybe you could call/email a bowyer that uses the stuff and buy some?

I know Bigfoot Bows (Kirkll) and Eaglwing Bows (Sixby) use the stuff.

syntactic foam comes in lots of variations.
Not sure what type is best or even works in a bow limb.

I found this place that at least sells strips instead of selling it in blocks...bet you'll have to buy a lot of it though...
    http://www.trelleborg.com/en/Offshore-Boston/Products--Solutions/Thermal-Insulation-Tape/

Here are a couple other places....
 http://www.crg-industries.com/advantic.htm

 http://www.synfoam.com/SynFoamPI.html
If some animals are good at hunting and others are suitable for hunting, then the Gods must clearly smile on hunting.~Aristotle

..there's more fun in hunting with the handicap of the bow than there is in hunting with the sureness of the gun.~ F.Bear

Offline LittleBen

  • Trad Bowhunter
  • **
  • Posts: 2970
Re: Where do you get foam limb core material?
« Reply #2 on: December 06, 2013, 01:57:00 PM »
turns out CRG-industries supplies morrison archery ...

Offline beachbowhunter

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2714
Re: Where do you get foam limb core material?
« Reply #3 on: December 06, 2013, 02:17:00 PM »
Dale Stahl carries it...
Ishi was a Californian                   :cool:

Offline Zradix

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5798
Re: Where do you get foam limb core material?
« Reply #4 on: December 06, 2013, 03:22:00 PM »
Surprisingly dense stuff isn't it?
The "stronger" stuff from crg is 40.5 lb/cu. ft.
That's about the same as walnut I believe.

...now the lighter stuff at 31.2 lb/cu. ft. is pretty light...but sounds a little weak to me....
If some animals are good at hunting and others are suitable for hunting, then the Gods must clearly smile on hunting.~Aristotle

..there's more fun in hunting with the handicap of the bow than there is in hunting with the sureness of the gun.~ F.Bear

Offline LittleBen

  • Trad Bowhunter
  • **
  • Posts: 2970
Re: Where do you get foam limb core material?
« Reply #5 on: December 06, 2013, 06:22:00 PM »
Yeah I think you're right. Makes me think it's not worth the trouble over walnut or maple or something like that.

Online jess stuart

  • Trad Bowhunter
  • **
  • Posts: 1722
Re: Where do you get foam limb core material?
« Reply #6 on: December 06, 2013, 06:43:00 PM »
Not real sure but The Old Master Crafter may have it, they seem to supply quite a few bowyers.  I haven't used them in a few years but, they always had good quality lams and riser woods.

Offline Zradix

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5798
Re: Where do you get foam limb core material?
« Reply #7 on: December 06, 2013, 08:19:00 PM »
Well I suppose it might depend on your reasons for wanting to try it.

Might make a difference if you're making a really deep cored bow.

Maybe you want to use all manmade materials just for fun or in hopes weather/humidity won't effect the bow..?

Or maybe you just want to use foam just to do it.

I doubt it will turn a bow into a super bow...but it would be fun to try...
If some animals are good at hunting and others are suitable for hunting, then the Gods must clearly smile on hunting.~Aristotle

..there's more fun in hunting with the handicap of the bow than there is in hunting with the sureness of the gun.~ F.Bear

Online goobersan

  • Trad Bowhunter
  • **
  • Posts: 1386
Re: Where do you get foam limb core material?
« Reply #8 on: December 07, 2013, 11:05:00 PM »
I know John at O.M.C. has some. PM me if you need more info. I should see him tomorrow night

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©