Sanding dust filling wood grain?

[Kopper1013]

Hey guys just wondering before starting to put finish on, how do you guy clean out the grain of your wood from the sanding dust that gets packed in?

[halfseminole]

I use mineral spirits, but acetone works for me as well.

[milehi101]

Tack rag works great

[delongbows]

High pressure air works like a charm if you are equipped with a compressor.

[Bowjunkie]

Denatured alcohol. I usually dye them with anilines following that, then tack cloth em off, then spray.

[Wolftrail]

Whats wrong with a good Vacuum cleaner.  I used to use a damp cloth untill finding that I was having the odd De-lamination.  I sand all parts with 50-60 grit then Vacuum them.
Rather stay away from chemicals. They smell up the garage and I have to burn the rags later so as not to cause spontaneous combustion.

[bigbob2]

Denatured alcohol, which we call "metho" short  for metholated spirits.Haven't had any problems as it evaporates very quickly in seconds.

[Crooked Stic]

X2 on air pressure.

[Bodork]

air pressure

[Ice Mike]

If you don't have access to a compressor, go to a Walmart or other dept. store and get one of those el cheapo paint brushes. They work great as dusters and konock the dust out of the grain well. I try to stay away from the chemicals on wood.

Also, if you use a compressor and blow it with air, make sure you have an oil and moisture trap on the line to keep from getting contaminates all over you wood.

[Jeff tech]

Air pressure especially between sanding sealer coats. Blow it hard