Author Topic: recurve stack ? (Read 316 times)

steadman · « **on:** September 16, 2014, 05:16:00 PM »

am going to try my hand at building a 1 pc recurve. What kind of stack do those of you who make glass recurves use? Any info would be appreciated.
Thanks!!

JamesV · « **Reply #1 on:** September 16, 2014, 06:22:00 PM »

Using my form similar to a Grizzly: On a 58" NTN .250 will get me 50-52Lb

James

steadman · « **Reply #2 on:** September 16, 2014, 06:55:00 PM »

Thanks! I should put it's a one pc and an 18" riser. Do you put a parallel and a taper or 2 tapers? Thanks again!

kennym · « **Reply #3 on:** September 16, 2014, 07:22:00 PM »

Ryan,

Here is Binghams site, you probably already have seen this, but if not look to left side and click on draw weight chart for a general idea....

http://binghamprojects.com/

Think they use a 21" riser.....

I built a 60" last year with a 19" riser(off a Kodiak Hunter but with added hook in tips and a power lam/tip wedge) using .0025" per inch taper and .262" at butt of lams stack .

It came in at 48# @ 28"

steadman · « **Reply #4 on:** September 16, 2014, 07:59:00 PM »

Thanks Kenny! Sure appreciate it!

News:

Author Topic: recurve stack ? (Read 316 times)

steadman

recurve stack ?

JamesV

Re: recurve stack ?

steadman

Re: recurve stack ?

kennym

Re: recurve stack ?

steadman

Re: recurve stack ?

Users currently browsing this topic: