Building a T/D riser? HELP PLEASE:)

[tarponnut]

I'm interested in building a riser for some limbs that I have. The limbs are off of a cheap PSE magnesium handled bow, the thing weighs a ton.

How difficult would it be to build a T/D riser for the limbs?
Is there a book or build along you can recommend?
Thanks,
Jim

[tarponnut]

Any ideas?

[Mike Most]

It can be done, many different ways, the limb pad angles will be the most critical areas, the riser length should be the same. I haven't been here for a while so I would hope some of the more current bow building vets chime in.

 

[rmorris]

Also, what is the configuration of the takedown system? 1 pin 1 bolt?

[tarponnut]

I will check the limb connections later. I believe it has one bolt and the riser is sort of recessed(like a pocket) for the limb.
Thanks guys.

[LittleBen]

You could always just add an alignment pin. might be easier than trying to replicate that pocket alignment system.

[beachbowhunter]

That shouldn't be too big of a problem. The trickiest part will be getting the bolt and alignment pins spaced and aligned properly. You can measure the riser length and the limb pad angles (+/- a degree or two won't kill you) and glue a riser up. Go for it!

[tarponnut]

I'm going to give it a shot. What do you guys recommend for riser wood?

[tarponnut]

Is there a book or tutorial anyone can recommend?

I have some basic woodworking skills but not bow making skills.Thanks.

[rmorris]

James, I am looking at the PSE risers on the internet  and they look to be an "IFL" design, Is this true for your limbs?

If yes, do a google search of "IFL wood riser build along" I found a few good things on making it work. If ya need any help tracking down any of the links or supplies let me know and I will help ya where I can...

[tarponnut]

It's a bowfishing rig called the Kingfisher. It actually shoots really well as is but it's super heavy.
Not an ILF system. Thanks, Jim

[JamesV]

Do some experimenting before you spend a lot of money on riser wood. Buy an 8' 2X4 and build 4 risers. Use lag bolts to secure the limbs till you get everything aligned. Get what you want and then use your good riser wood and make a copy.