« previous next »
Pages: [1]   Go Down

Author Topic: Bowform making-pics  (Read 664 times)

Offline Buemaker

  • Trad Bowhunter
  • **
  • Posts: 3116
Bowform making-pics
« on: January 22, 2015, 04:53:00 PM »
I.`ll post a few pics showing how I made this bow form.I told a computer guy what I wanted and he made a drawing on a computer (don`t ask me how) Then a steel template was cut out with a computer guided laser cutter, I then had a very accurate template.On my router table which have a 30mm spindle I have two options, a large straight router bit or a solid aluminum drum with 40 grit paper. Both have the same diameter as a template bearing. I think the pics speak for them self, but if something is not clear fire away. Bue--.
 
Logged

Offline Buemaker

  • Trad Bowhunter
  • **
  • Posts: 3116
Re: Bowform making-pics
« Reply #1 on: January 22, 2015, 04:55:00 PM »
Logged

Offline Buemaker

  • Trad Bowhunter
  • **
  • Posts: 3116
Re: Bowform making-pics
« Reply #2 on: January 22, 2015, 04:57:00 PM »
Logged

Offline Buemaker

  • Trad Bowhunter
  • **
  • Posts: 3116
Re: Bowform making-pics
« Reply #3 on: January 22, 2015, 04:59:00 PM »
Logged

Offline bigbob2

  • Trad Bowhunter
  • **
  • Posts: 2160
Re: Bowform making-pics
« Reply #4 on: January 22, 2015, 05:38:00 PM »
wow Bue you will have a very true form once that's done. good one!
Logged

Offline fujimo

  • Trad Bowhunter
  • **
  • Posts: 3619
Re: Bowform making-pics
« Reply #5 on: January 22, 2015, 06:11:00 PM »
wow!!!   :thumbsup:
Logged

Offline bjansen

  • Trad Bowhunter
  • **
  • Posts: 2263
Re: Bowform making-pics
« Reply #6 on: January 22, 2015, 06:19:00 PM »
The ultimate template...3/8" steel!
Logged

Offline Buemaker

  • Trad Bowhunter
  • **
  • Posts: 3116
Re: Bowform making-pics
« Reply #7 on: January 22, 2015, 06:28:00 PM »
Almost right, 8mm which was a serious overkill, 1/4" would have been enough. Bue--.
Logged

Offline Wolftrail

  • Trad Bowhunter
  • **
  • Posts: 1152
Re: Bowform making-pics
« Reply #8 on: January 22, 2015, 07:04:00 PM »
Yep ,  there is something to be said about accurate templates and jigs..  :D
Logged

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20689
Re: Bowform making-pics
« Reply #9 on: January 22, 2015, 08:10:00 PM »
Nice Bue..
Logged

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: Bowform making-pics
« Reply #10 on: January 22, 2015, 08:53:00 PM »
COOL!!
Logged
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Offline bamboo

  • Trad Bowhunter
  • **
  • Posts: 1161
Re: Bowform making-pics
« Reply #11 on: January 22, 2015, 09:46:00 PM »
geeeze!! I'd have to think that shaper bit would blow a guys hair back!!--and whack that plywood into shape!!nice stuff bue!!looking good!!
Logged
Mike

Offline Pheonixarcher

  • Trad Bowhunter
  • **
  • Posts: 1224
Re: Bowform making-pics
« Reply #12 on: January 22, 2015, 10:40:00 PM »
I don't know what's more impressive, your template, the form itself, or your shop! Great stuff.
Logged
Plant a fruit or nut tree today, and have good hunting tomorrow.
=}}}}}-----------------------------}>

Offline Crittergetter

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 2634
Re: Bowform making-pics
« Reply #13 on: January 22, 2015, 10:49:00 PM »
Impressive!! Now you got me thinking, I sub contract a lot of work from a machine shop and I know they have several Cnc machines. I'm thinking I could work up a trade!!!   :thumbsup:
Logged
An elitist mentality creates discord, even among the elite!
"I went jackalope hunting but all I saw was does!"
Luck is when preparedness meets opportunity, I just need more opportunities!

Offline Trux Turning

  • Trad Bowhunter
  • **
  • Posts: 1814
Re: Bowform making-pics
« Reply #14 on: January 22, 2015, 11:05:00 PM »
Nice Beu!
Logged

Offline takefive

  • Trad Bowhunter
  • **
  • Posts: 1098
Re: Bowform making-pics
« Reply #15 on: January 23, 2015, 01:44:00 AM »
Very slick, Bue    :thumbsup:
Logged
It's hard to make a wooden bow which isn't beautiful, even if it's ugly.
-Tim Baker

Offline Standswittaknife

  • Trad Bowhunter
  • **
  • Posts: 30
Re: Bowform making-pics
« Reply #16 on: January 23, 2015, 10:52:00 AM »
well done! I did the same thing, but had the CNC guy to it all for me!  I don't have a template to make more forms, but he has it saved so he can cut some more forms in the future if needed.
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©