What kinda glue for splicing lam's together?

[Kopper1013]

I'm currently using this heat resistant and flex able super glue but it takes 24 hours to cure, just wondering what ya'll are working with....

[Mad Max]

I used super glue before, but had them come apart

If your using smooth-on for the rest of the bow ,use that, put a lamp over the glue joint for a hour and the next day your set

[canopyboy]

I use Loctite superglue, the blue bottle you can get at your local home store. I've never had them come apart. I make a scarf joint on the sander and clamp them for about 10 minutes. I often pre-bend my lams in the form under pressure for a full cook cycle in the oven, and the joints are still solid after that.

[BrushWolf]

Smooth on for me.

[jsweka]

I use plain old tite bond wood glue.  Works for me.

[Mad Max]

Originally posted by canopyboy:
I use Loctite superglue, the blue bottle you can get at your local home store. I've never had them come apart. I make a scarf joint on the sander and clamp them for about 10 minutes. I often pre-bend my lams in the form under pressure for a full cook cycle in the oven, and the joints are still solid after that.

I use the loctite too
If you cut the bottle open you can get more glue out of it.

[mikkekeswick]

If your joint is good then most decent wood glues will work. Afterall the splice is n't really under much load being glued to the glass and core.

[Bowjunkie]

It just needs to be able to handle bending into shape at the handle area. I've had superglued joints come apart if the deflex was drastic. I run the toothing plane over the joint surfaces and use Smooth On and heat.

[Roy from Pa]

Smooth On.

[LittleBen]

5min epoxy. I'm impatient

[Kopper1013]

Lol me to littleben and thanks for the input guys