« previous next »
Pages: [1]   Go Down

Author Topic: Endgrained and spliced veneers  (Read 278 times)

Offline rmorris

  • Trad Bowhunter
  • **
  • Posts: 1289
Endgrained and spliced veneers
« on: May 10, 2015, 02:11:00 PM »
Has anyone ever used endgrainedwood for spliced veneers? I'm thinking about using some End grain marble wood in a splice veneer.
Logged
"Havin' such a good time Oo-de-lally, Oo-de-lally Golly, what a day"

Offline mikkekeswick

  • Trad Bowhunter
  • **
  • Posts: 988
Re: Endgrained and spliced veneers
« Reply #1 on: May 11, 2015, 01:14:00 AM »
As long as it doesn't need to bend too much to get glued up you should be ok. I used some end grain pieces for the accent strip between spliced lams and unfortunately it failed when I inflated the airhose....I only noticed when I peeled the masking tape off.
Logged

Offline BenBow

  • Trad Bowhunter
  • **
  • Posts: 4690
Re: Endgrained and spliced veneers
« Reply #2 on: May 11, 2015, 01:34:00 PM »
Ralph when i do smething like that i glue one of the parallel lams to the spliced lam first than sand it to thickness before gluing it up with the rest of the lams. This keeps the splice from breaking. Do a dry run with the end grain to see if it holds up.
Logged
But his bow will remain steady, and his hands will be skillful; because of the hands of the Mighty One of Jacob, because of the Shepherd, the Rock of Israel,  (Genesis 49:24 [NETfree])

Offline mikkekeswick

  • Trad Bowhunter
  • **
  • Posts: 988
Re: Endgrained and spliced veneers
« Reply #3 on: May 12, 2015, 01:51:00 AM »
Yep that's what I thought about after I broke a pair!
Logged

Offline rmorris

  • Trad Bowhunter
  • **
  • Posts: 1289
Re: Endgrained and spliced veneers
« Reply #4 on: May 15, 2015, 02:07:00 PM »
Galen and Mike,
I think I may give it a go, all I have is bad clear glass so what is the worst that can happen?
Logged
"Havin' such a good time Oo-de-lally, Oo-de-lally Golly, what a day"
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©