Author Topic: 46" Recurve - Rosewood and Black Myrtle (Read 1051 times)

Jon in North Idaho · « **on:** March 10, 2016, 09:38:00 AM »

I finished this one up a month or so ago... Been too busy to get pics until recently!

So, I call this a 46" bow (measured along the back profile) however, it uses a 40" string.... so under ATA/AMO standards, this is actually a 43" Recurve

The full draw pic is at 28". This design opens up more mid-limb to nock as it's drawn. It will go to 30" no problem. I use a 2-finger draw (a "Toelke" draw).

This one is 65@28... and that's the MAX weight I make this one... actually I normally do 60# max draw weight on this design... This was built for a 26 1/2" draw (60#).

Lots of fun to shoot, surprisingly quiet with no silencers. Personally, I shoot this design every bit as well as a 66" R/D.

Bernie B. · « **Reply #1 on:** March 10, 2016, 10:32:00 AM »

Wow! That's a great looking little bow! It would be perfect for turkey hunting!

Bernie

chackworth3 · « **Reply #2 on:** March 10, 2016, 10:38:00 AM »

Looks great Jon

Jomohr84 · « **Reply #3 on:** March 10, 2016, 10:43:00 AM »

Very nice!

Dmaxshawn · « **Reply #4 on:** March 10, 2016, 03:30:00 PM »

sweet looking bow I have to build me one out of that black myrtle since I have a good stock pile of it

Shawn

1oldbowguy · « **Reply #5 on:** March 10, 2016, 03:52:00 PM »

Very nice, well done, love the colors. Congrats on a great looking bow.

Mad Max · « **Reply #6 on:** March 10, 2016, 05:19:00 PM »

Beautiful bow

glenbo · « **Reply #7 on:** March 10, 2016, 07:29:00 PM »

Very nice job on the build. She is a beauty.

takefive · « **Reply #8 on:** March 10, 2016, 08:04:00 PM »

That's one cool looking short bow. Beautiful wood and beautiful work!

Trux Turning · « **Reply #9 on:** March 10, 2016, 09:21:00 PM »

Very nice! Those are pretty cool little bows.

bjansen · « **Reply #10 on:** March 11, 2016, 08:58:00 PM »

Nice one. Love seeing guys making these shorties

Mark Smeltzer · « **Reply #11 on:** March 11, 2016, 11:04:00 PM »

Nice job on that, I like it alot.

Wolftrail · « **Reply #12 on:** March 12, 2016, 12:23:00 AM »

Wow crazy build

Bvas · « **Reply #13 on:** March 14, 2016, 09:49:00 PM »

Sweet little unit for sure!!!!

What's the brace height on it?

Draffish · « **Reply #14 on:** March 18, 2016, 06:10:00 PM »

Wow what an awesome little bow. Do you know what the longest draw length you could get from one of these if the max weight is 68? Grats

JJB · « **Reply #15 on:** March 20, 2016, 10:02:00 AM »

That's a sweet looking bow, very well done!
-Jay

Jon in North Idaho · « **Reply #16 on:** March 21, 2016, 10:18:00 AM »

Quote

Originally posted by Draffish:
Wow what an awesome little bow. Do you know what the longest draw length you could get from one of these if the max weight is 68? Grats

This design will draw to 30" with no stacking - I have taken it to 31" with no problems

Because of the extreme design and stresses on these limbs, I don't like to go above 60#, regardless of draw length -- however this one is 65@28 and is doing great shooting at a 28" draw, so I might start offering up to 65# -- I still need to test this one more to be sure...

Draffish · « **Reply #17 on:** March 21, 2016, 05:57:00 PM »

Thanks Jon I will be putting this on my list to do.

Your a true craftsman and this bow shows it

MikeWinVA · « **Reply #18 on:** March 22, 2016, 08:53:00 PM »

That is a fine bit of craftsmanship.

I am guessing you used a form to make this bow.

Would you be willing to share the dimensions or post a picture of the form? This is assuming that you are not doing this professionally and it is a trade secret.

JEFF B · « **Reply #19 on:** March 23, 2016, 05:36:00 AM »

wow!!! that is insane way to short but man i sure do like the look of it well done Jon

News:

Author Topic: 46" Recurve - Rosewood and Black Myrtle (Read 1051 times)

Users currently browsing this topic: