Author Topic: Self bows and fast flight strings  (Read 1051 times)

Offline Harry

  • Trad Bowhunter
  • **
  • Posts: 80
Self bows and fast flight strings
« on: October 25, 2016, 12:55:00 AM »
Any one ever try or use ff strings on self bows or BBOs? Results?

Offline mikkekeswick

  • Trad Bowhunter
  • **
  • Posts: 988
Re: Self bows and fast flight strings
« Reply #1 on: October 25, 2016, 03:31:00 AM »
Yes no problem. Just pad the ends out to 14 strand minmimum.

Offline RedStag5728

  • Trad Bowhunter
  • **
  • Posts: 315
Re: Self bows and fast flight strings
« Reply #2 on: October 25, 2016, 04:55:00 AM »
Have not tried FF, but I started off with B-50 and then just made two D-97 strings for both my dads and my self-bow and have noticed a difference in cast, and a slight difference in noise (D-97 a little noisier).

Both our self-bows probably gained about 5 fps I can guess. I did not pad it out either, both bows are hickory, and hickory is pretty tough. My dads bow is 10 strand (50#) and my self-bows is 12 (60#)
Randy
CTA RedStag LB 64" ntn 57# @ 28"
Hickory SB (#2) 64" ntn 43# @ 28"
Hickory East Woodland SB 65# @ 27"
Darkside Laminated LB 50# @ 28"
Darkside Laminated LB 37# @ 28"

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20641
Re: Self bows and fast flight strings
« Reply #3 on: October 25, 2016, 05:09:00 AM »
Yes on BBO bows, but I put buffalo horn tip overlays on all my bows. Never have had any problems.

Offline LittleBen

  • Trad Bowhunter
  • **
  • Posts: 2970
Re: Self bows and fast flight strings
« Reply #4 on: October 25, 2016, 08:20:00 AM »
No problems at all. I never use anything else.

I've also stopped padding the loops. I do always use overlays though. Might make a difference without overlays (although I doubt it), but there's just no way a string with 200 or 300 lbs of tension is going to cut into a hardwood, bone, antler, horn, or phenolic overlay.

Actually scratch that, I don't always add overlays. I've been shooting a 50# mulberry recurve without overlays for some time without incident. The string groove does not cut into the back though, only sides and belly.

Offline Harry

  • Trad Bowhunter
  • **
  • Posts: 80
Re: Self bows and fast flight strings
« Reply #5 on: October 25, 2016, 02:42:00 PM »
Thanks for the info an experience
 shared. Will try on my bbo.

Offline takefive

  • Trad Bowhunter
  • **
  • Posts: 1098
Re: Self bows and fast flight strings
« Reply #6 on: October 25, 2016, 02:52:00 PM »
I like D97 over B50 just because it stretches less.  Especially when you first brace the bow.  It does give you a bit more speed.  I'm working on a buckthorn selfbow that won't have tip overlays, so I'll pad the loops with 4 strands.  I have an osage bow w/o overlays that I didn't pad and the string doesn't cut into it.  That's extremely dense wood, though.
It's hard to make a wooden bow which isn't beautiful, even if it's ugly.
-Tim Baker

Offline michaelschwister

  • Trad Bowhunter
  • **
  • Posts: 576
Re: Self bows and fast flight strings
« Reply #7 on: October 26, 2016, 02:57:00 PM »
I use FF and 450+ all the time. Osage is much tougher and far less likely to be damaged than fiberglass.
"The best thing to give to your enemy is forgiveness; to a friend, your heart; to your child, a good example; to a father, deference; to your mother, conduct that will make her proud of you; to yourself, respect" - Benjamin Franklin

Online Walt Francis

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 3089
Re: Self bows and fast flight strings
« Reply #8 on: October 26, 2016, 07:17:00 PM »
I use several types of the no-stretch (FF) material on all my self bows, never had a problem.  Rarely use B50 anymore.
The broadhead used, regardless of how sharp, is nowhere as important as being able to place it in the correct spot.

Walt Francis

Regular Member of the Professional Bowhunters Society

Offline Harry

  • Trad Bowhunter
  • **
  • Posts: 80
Re: Self bows and fast flight strings
« Reply #9 on: October 26, 2016, 07:45:00 PM »
Just put a SBD String on my BBO and shoots very quiet, seems bit faster and no hand shock.

Offline scrub-buster

  • Trad Bowhunter
  • **
  • Posts: 1395
Re: Self bows and fast flight strings
« Reply #10 on: October 26, 2016, 07:54:00 PM »
I use 8 and 10 strand FF strings on my selfbows all the time.  I have horn tip overlays on all the bows that I make.
AKA Osage Outlaw

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15006
Re: Self bows and fast flight strings
« Reply #11 on: October 27, 2016, 11:50:00 AM »
I have 2 Dano osage bows, both have FF strings and neither have overlays on the tips.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©